Table of Contents
Advertisement
RTCU LX5 pro Technical Manual V1.00
Advanced Industrial M2M/IoT Gateway
Antennas
Cellular Antenna
The RTCU LX5 pro device contains an SMA female connector for connecting a suitable LTE
compliant antenna. When installing the antenna, please ensure that the antenna is not in close
proximity to metallic parts or anything else, which can influence the antenna's efficiency.
Please consult the installation guide that follows the antenna.
GNSS antenna
The RTCU LX5 pro supports GPS, GLONASS, GALILEO, and QZSS, so a suitable GNSS antenna
must therefore be used. The connection is with an SMA female connector, and the antenna must be
a 3V active antenna with an SMA male connector.
When installing the antenna, please make sure that the antenna has a good view of the sky to
receive the satellites' weak signals. Please also consult the installation guide that follows the
antenna.
WLAN Antenna
The RTCU LX5 pro device contains an RP-SMA female connector for connecting a suitable WLAN
antenna.
When installing the antenna, please ensure that the antenna is not close to metallic parts or
anything else, influencing its efficiency. Please consult the installation guide that follows the
antenna.
RF Antenna
The RTCU LX5 pro device contains an internal chip antenna for the 868 MHz ISM band.
It is recommended not to place the RTCU LX5 device inside a metal enclosure as this will degrade
the ISM RF performance.
Logic IO ApS.
Ph: (+45) 7625 0210
Holmboes Allé 14
Fax: (+45) 7625 0211
8700 Horsens
Page 25 of 37
Email: support@logicio.com
Denmark
www.logicio.com
Advertisement
Table of Contents
Need help?
Do you have a question about the RTCU LX5 pro and is the answer not in the manual?