Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Logic IO RTCU LX2 pro
Summary of Contents for Logic IO RTCU LX2 pro
- Page 1 RTCU LX2 pro Advanced Industrial M2M/IoT Gateway Technical Manual Version 1.00...
- Page 2 RTCU LX2 pro Technical Manual V1.00 Advanced Automotive M2M/IoT Gateway Logic IO ApS. Ph: (+45) 7625 0210 Holmboes Allé 14 Fax: (+45) 7625 0211 8700 Horsens Page 2 of 39 Email: support@logicio.com Denmark www.logicio.com...
-
Page 3: Introduction
Advanced Automotive M2M/IoT Gateway Introduction The RTCU LX2 pro is a powerful successor to the RTCU MX2 turbo with significant features, capacity, power and security improvements. The RTCU LX2 pro is based on the latest LX hardware architecture, offering an unprecedented balance between price and performance The RTCU LX2 pro is positioned for a broad range of professional Automotive Internet of Things applications. -
Page 4: Table Of Contents
Table of Contents Introduction ..............................3 Table of Contents ............................4 Important Information ........................... 5 Differences between the RTCU MX2 turbo and the RTCU LX2 pro ............6 Technical Highlights ............................7 Graphical Overview ............................9 External Connections ........................... 10 Overview .............................. -
Page 5: Important Information
In the event of damage to the device caused by failure to observe the information in this manual and on the device, Logic IO Aps shall not be required to honor a warranty claim even during the warranty period and shall be exempted from the statutory accident liability obligation. -
Page 6: Differences Between The Rtcu Mx2 Turbo And The Rtcu Lx2 Pro
RTCU LX2 pro Technical Manual V1.00 Advanced Automotive M2M/IoT Gateway Differences between the RTCU MX2 turbo and the RTCU LX2 pro The table below lists the differences between the RTCU LX2 pro and the RTCU MX2 turbo LTE: Feature RTCU LX2 pro... -
Page 7: Technical Highlights
RTCU LX2 pro Technical Manual V1.00 Advanced Automotive M2M/IoT Gateway Technical Highlights Platform: ➢ Based on the RTCU M2M Platform. ➢ NX32L (NX32 for Linux) execution architecture. RTCU IDE development tool. Operates under a full and highly optimized Linux variant. - Page 8 RTCU LX2 pro Technical Manual V1.00 Advanced Automotive M2M/IoT Gateway User Interaction: ➢ 4 x bi-color LED. ➢ Dual user DIP-switches. ➢ Reset/recovery switch. ➢ High-speed Mini-USB service-port connector. Audio: ➢ Fully digitized audio system. ➢ Digitized cellular audio. ➢ DTMF support for Interactive Voice Response applications.
-
Page 9: Graphical Overview
RTCU LX2 pro Technical Manual V1.00 Advanced Automotive M2M/IoT Gateway Graphical Overview A graphical overview of the front- and back are shown below: SER2 BT Antenna GNSS Antenna Cell Antenna X3: I/O Service Port SIM Card Reader Eject Button X2: COM... -
Page 10: External Connections
RTCU LX2 pro Technical Manual V1.00 Advanced Automotive M2M/IoT Gateway External Connections Connections to external equipment are made via the connectors located on the back and front of the RTCU LX2 pro. The front panel is equipped with connectors commonly accessed by the user: SIM-Card, DIP-switch, Service/programming port, LED's, RS232 and the reset button. -
Page 11: Connector X2: 12 Pin Com Connector
RTCU LX2 pro Technical Manual V1.00 Advanced Automotive M2M/IoT Gateway Connector X2: 12 pin COM connector 1W-LED 1WIRE CAN1-L CAN1-H DIN6 RS485A DC-Out RS485B Name Description 1WIRE 1-Wire bus Signal Ground CAN1-H CAN-bus 1 H-signal DIN6 Digital input 6 RS485A... -
Page 12: Connector X3: 16 Pin I/O Connector
RTCU LX2 pro Technical Manual V1.00 Advanced Automotive M2M/IoT Gateway Connector X3: 16 pin I/O connector AIN2 AGND AIN1 AGND DIN5 DIN3 5 13 DIN4 4 12 DIN1 3 11 DIN2 DOUT3 2 10 DOUT4 DOUT1 DOUT2 Name Description DOUT 1... -
Page 13: Connector X4: 6 Pin Ser1 Connector
RTCU LX2 pro Technical Manual V1.00 Advanced Automotive M2M/IoT Gateway Connector X4: 6 pin SER1 connector CAN2-H CAN2-L Name Description Transmit Data from serial port 1, RS232 compatible CAN2-H CAN-bus 2 H-signal CAN2-L CAN-bus 2 L-signal Receive Data for serial port 1, RS232 compatible... -
Page 14: Power Supply
Advanced Automotive M2M/IoT Gateway Power Supply The RTCU LX2 pro device must be supplied with 8..36 VDC from an external DC power source connected to the X1 connector. Positive power is applied to the SUPP pin, and the ground is connected to the PGND pin. -
Page 15: Digital Outputs
The maximum switchable inductance is 20mH and must not be exceeded. The digital outputs are supplied through the X1 power connector that also supplies the rest of the RTCU unit. As the power is also the RTCU LX2 pro main power, a power fail would also affect the digital outputs. -
Page 16: Digital Inputs / Ignition Input
RTCU LX2 pro Technical Manual V1.00 Advanced Automotive M2M/IoT Gateway Digital Inputs / Ignition Input The digital inputs are all low-pass filtered and transient-protected. To activate the inputs, connect a positive voltage between the input and the GND connector. Please note: The DIN 5/IGN input is special as it also functions as the ignition input. If the ignition input is activated with a logical high or low (Wait For Event mode only), it will wake up the unit when the RTCU is in low power mode. -
Page 17: Analog Inputs / Flex Inputs
Advanced Automotive M2M/IoT Gateway Analog Inputs / Flex Inputs The RTCU LX2 pro has two analog inputs. The analog inputs are voltage inputs specified with an operating range of 0V to 30V DC. The conversion resolution is up to 12 bit(0..4095). - Page 18 RTCU LX2 pro Technical Manual V1.00 Advanced Automotive M2M/IoT Gateway The analog inputs are made available at the same time as both normal analog inputs with an operating voltage range of 0-10V DC, and as flex inputs. When used as flex inputs, the inputs are multi-mode inputs that can be configured to operate as either analog or digital inputs.
-
Page 19: Can Communication Port
RTCU LX2 pro Technical Manual V1.00 Advanced Automotive M2M/IoT Gateway CAN Communication Port The RTCU provides the physical layer for the CAN (Controller Area Network) serial communication interface in accordance with the ISO 11898 standard. The CAN bus is designed for high-speed (up to 1Mbit) robust communication in especially harsh environments like those found in the automotive industry. -
Page 20: Rs232 Port 1
RTCU LX2 pro Technical Manual V1.00 Advanced Automotive M2M/IoT Gateway RS232 Port 1 This port can be used as a general-purpose RS232 serial port without hardware handshake signals. X4: 6 pin SER1 connector overview Name Description Transmit Data from serial port 1, RS232 compatible... -
Page 21: Rs485 Port
If the RTCU LX2 pro is used as an endpoint node, the RS485 communication lines can be terminated with 120Ω by using configuration DIP-switch 4, located on the front, behind the end-cap. -
Page 22: 1-Wire Bus
RTCU LX2 pro Technical Manual V1.00 Advanced Automotive M2M/IoT Gateway 1-Wire Bus The 1-Wire bus is available on the X2 connector. All 1-Wire communication goes through a single connection, and all 1-Wire devices connected can retrieve power directly from the bus (called parasitic power). -
Page 23: 3D Movement Sensor
Advanced Automotive M2M/IoT Gateway 3D Movement Sensor The RTCU LX2 pro unit contains a 3-axis accelerometer and 3-axis gyroscope in order to detect both vibration and motion. This sophisticated range of movement sensors allows for detecting movement and position change in 3 directions, X-Y-Z with force as high as 16g in acceleration, 2000 dps in rotation. -
Page 24: Led Indicators
RTCU LX2 pro Technical Manual V1.00 Advanced Automotive M2M/IoT Gateway LED Indicators Four bi-colored (red and green) LED indicators are present on the front of the unit (see the graphical overview). Two bi-colored LED (A and B) are available to the user, and the remaining two LEDs (S1 and S2) signal the status and possible errors of the RTCU device. - Page 25 RTCU LX2 pro Technical Manual V1.00 Advanced Automotive M2M/IoT Gateway S1: System LED1 pattern overview Pattern Description Fastest blinking, green The device is initializing, preparing to start the application. Fast blinking, green The device is installing an update. Depending on the kind of S2 On, green update, it may take some time.
-
Page 26: Switches
Advanced Automotive M2M/IoT Gateway Switches User DIP-Switch The RTCU LX2 pro unit contains a user-accessible DIP switch with two switches. The DIP-switch is located on the front panel for easy user access (see the graphical view). System Switch (RST) The RTCU LX2 pro device contains a combined reset/diagnostic switch. This switch is accessible from the front of the unit (see the graphical overview). -
Page 27: Internal Li-Ion Backup Battery
RTCU LX2 pro Technical Manual V1.00 Advanced Automotive M2M/IoT Gateway Internal Li-Ion Backup Battery The RTCU contains an internal Li-Ion battery for operation even when the external power is absent, making it possible to report power loss etc. Please note, that when external power is removed, the device will be powered down by default. -
Page 28: Wireless Communication
The Cellular Engine is designed for Worldwide deployment. Bluetooth LE The RTCU LX2 pro has an on-board Bluetooth LE 5.3 radio operating at the standard 2.4 GHz spectrum. Please consult the RTCU IDE for details on the application usage. Logic IO ApS. -
Page 29: Multi Gnss Receiver
Sensitivity Acquisition: -147 dBm. • Reacquisition: -159 dBm. • Tracking: -165 dBm. The RTCU LX2 pro is available in variants with DR and RTK. Logic IO ApS. Ph: (+45) 7625 0210 Holmboes Allé 14 Fax: (+45) 7625 0211 8700 Horsens Page 29 of 39 Email: support@logicio.com... -
Page 30: Sim-Card Readers
The RTCU LX2 pro is also prepared for an M2M chip internally, which shares the SIM card signals with the internal SIM-card reader. Please contact Logic IO for information on this option. -
Page 31: Installing The Internal Sim-Card
RTCU LX2 pro Technical Manual V1.00 Advanced Automotive M2M/IoT Gateway Installing the Internal SIM-card In order to gain access to the internal SIM-card reader, it is necessary to disassemble the device, as described in Appendix A. Internal SIM- Card reader The SIM card reader is lid-based with a mechanical lock to secure a safe installation. -
Page 32: Antennas
Antennas Cellular Antenna The RTCU LX2 pro device contains an SMA female connector for connecting a suitable LTE- compliant antenna. When installing the antenna, please ensure that the antenna is not close to metallic parts or anything else which can influence the antenna's efficiency. -
Page 33: Product Identification Label With Barcode
The RTCU LX2 pro product identification on the device's exterior contains a unique serial number in readable form and a barcode. The first three digits in the serial number identify the device type, and for the RTCU LX2 pro evaluation device, this unique code is 376 or 377. -
Page 34: Power Consumption
RTCU LX2 pro Technical Manual V1.00 Advanced Automotive M2M/IoT Gateway Power Consumption The table below shows detailed information about the RTCU LX2 pro device's typical power consumption while operating. Typical power consumption: Device operating in normal mode Device active Device active with Cellular on*... -
Page 35: Appendices
Appendices Appendix A – Opening the Device We recommend not disassembling the RTCU LX2 pro device, and the only situation where this is required is to gain access to the internal SIM card reader. The following steps describe the process. -
Page 36: Appendix B - Configuration Dip-Switches
RTCU LX2 pro Technical Manual V1.00 Advanced Automotive M2M/IoT Gateway Appendix B – Configuration DIP-switches The configuration jumper DIP-switch is located near the front side of the board, behind the front panel. To gain access it is necessary to remove the front end-cap using a Torx TX10 screwdriver. -
Page 37: Appendix C - Open Source Disclaimer
Advanced Automotive M2M/IoT Gateway Appendix C - Open Source Disclaimer The RTCU LX2 pro products include several open-source software tools. This open-source software is governed by the terms and conditions of the applicable open-source license. You are bound by the terms and conditions of the appropriate open-source license in connection with your use and distribution of the open-source software in this product. -
Page 38: Rtcu Lx2 Pro Specifications
RTCU LX2 pro Technical Manual V1.00 Advanced Automotive M2M/IoT Gateway RTCU LX2 pro Specifications RTCU M2M Platform Bluetooth Wired Communication • • • NX32L Execution Architecture. Bluetooth Low Energy 5.3. 2 x Full CAN2.0B with hardware • • filtering and multi-speed support. - Page 39 RTCU LX2 pro Technical Manual V1.00 Advanced Automotive M2M/IoT Gateway External Interfaces Power Management Approvals • • • Plug-compatible with the MX2 turbo Low-power modes. 2007/46/EC UN ECE R10 Rev. 06 (E1). and the RTCU NX-200. • • Wait for Event: 2014/53/EU Radio Equipment Directive.