Control Panel - Bourgeat NOMAD Instructions For Use And Maintenance Manual

CONTROL PANEL

y Turning it on : connect the plug to the mains dependent on a highly-sensitive differential device that is protected against overcur-
rent.
All of the cart's functions can be accessed directly via the touch screen.
2x8 model :
Management mode button
Left chamber control button
Left chamber temperature
Right chamber control button
USE
These devices are designed to ensure maintaining cold with a fan in one compartment using eutectic plates and hot with a fan in
the other compartment. When turned on, both chambers are neutral.
y Hot transfer use
Cold foods must be at a temperature less than 3°C, and hot foods at a temperature above 70°C. The cart has to be turned on at least
1 h before it is loaded in order to refrigerate the cold compartment. The hot compartment can be turned on just before the hot food
is introduced. This is turned on directly by pressing the hot compartment button.
Left chamber
control button
Right chamber
control button
Validation screen. Eutectic plate installation
Eutectic cooling operating screen on one
chamber
Keep your finger on this
button for 2 seconds.
Heat lamp/plate control button
Time
Right chamber temperature
Upper chamber
control button
Lower chamber
control button
Hot temperature holding operating
screen on one chamber.
13