Turning The Printer On/Off; Turning On The Printer; Turning Off The Printer - Toshiba B-EX4T1 Series Owner's Manual

2.PRINTER SETUP
2.5 Turning the Printer
ON/OFF

2.5.1 Turning ON the Printer

CAUTION!
Use the power switch to turn
the printer On/Off. Plugging
or unplugging the Power Cord
to turn the printer On/Off may
cause fire, an electric shock,
or damage to the printer.
NOTE:
If a message other than ON
LINE appears on the display
or the ERROR LED lamp is
illuminated, refer to Section
5.1, Error Messages.

2.5.2 Turning OFF the Printer

CAUTION!
1. Do not turn off the printer
power while the media is
being printed, as this may
cause a paper jam or
damage to the printer.
2. Do not turn off the printer
power while the ON LINE
lamp is blinking as this
may cause damage to
your computer.
When the printer is connected to your host computer it is good practice to
turn the printer ON before turning on your host computer and turn OFF your
host computer before turning off the printer.
1. To turn ON the printer power, press the Power Switch as shown in the
diagram below. Note that ( | ) is the power ON side of the switch.
2. Check that the ON LINE message appears in the LCD Message Display
and that the ON LINE and POWER LED lights are illuminated.
1. Before turning off the printer Power Switch verify that the ON LINE
message appears in the LCD Message Display and that the ON LINE
LED light is on and is not flashing.
2. To turn OFF the printer power press the Power Switch as shown in the
diagram below. Note that () is the power OFF side of the switch.
19
Power Switch
Power Switch