Turning The Printer On - Toshiba BA420T Series Owner's Manual

2. PRINTER SETUP
2.6 Turning the Printer
ON
CAUTION!
Use the power switch to turn
the printer On/Off. Plugging or
unplugging the Power Cord to
turn the printer On/Off may
cause fire, an electric shock, or
damage to the printer.
NOTES:
1. If a message other than ON
LINE appears on the
display or the ERROR LED
(Orange) is illuminated, go
to Section 4.1, Error
Messages.
2 To turn OFF the printer
power, push and hold the
Power Switch to
approximately 3 seconds.
When the printer is connected to your host computer it is good practice to
turn the printer ON before turning on your host computer and turn OFF
your host computer before turning off the printer.
1. To turn ON the printer power, push and hold the Power Switch to
approximately 3 seconds as shown in the diagram below.
2. Check that the ON LINE message appears in the LCD Message
Display and that the ON LINE LED (Blue) is illuminated.
E2- 15
ENGLISH VERSION

2.6 Turning the Printer ON

Power Switch