Turning The Printer On/Off - Toshiba B-EX6T Series Quick Installation Manual

4. Turning the Printer ON/OFF

CAUTION!
Use the power switch to turn the printer On/Off. Plugging or unplugging the Power Cord to turn the
printer On/Off may cause fire, an electric shock, or damage to the printer.
When the printer is connected to your host computer it is good practice to turn the printer ON
before turning on your host computer and turn OFF your host computer before turning off the
printer.
4.1 Turning ON the Printer
1. To turn ON the printer power, press the
Power Switch as shown in the diagram
below. Note that ( | ) is the power ON side
of the switch.
2. Check that the ON LINE message appears
in the LCD Message Display and that the
ON LINE and POWER LED lights are
illuminated.
NOTE:
If a message other than ON LINE appears on the display or the ERROR LED lamp is illuminated, refer to
Owners manual, Error Messages.
4.2 Turning OFF the Printer
CAUTION!
1. Do not turn off the printer power while the media is being printed as this may cause a paper jam
or damage to the printer.
2. Do not turn off the printer power while the ON LINE lamp is blinking as this may cause damage
to your computer.
1. Before turning off the printer Power Switch verify
that the ON LINE message appears in the LCD
Message Display and that the ON LINE LED light
is on and is not flashing.
2. To turn OFF the printer power, press the Power
Switch as shown in the diagram below. Note that
(O) is the power OFF side of the switch.
< For EU only >
TOSHIBA TEC Europe Retail Information Systems S.A
Z1 Research Park 160, BE-1731 Zellik
www.toshibatec-eu.com
Copyright © 2016
by TOSHIBA TEC CORPORATION
All Rights Reserved
1-11-1, Osaki, Shinagawa-ku, Tokyo 141-8562, JAPAN
E
E-8
Power Switch
Power Switch
PRINTED IN INDONESIA
SPTM-0289