Turning The Printer On And Off; How To Turn The Power On; How To Turn The Power Off - Toshiba BV420D Owner's Manual

8. Turning the Printer On and Off

 Press the [POWER] button of the printer to turn it on or off.
Do not plug in or unplug the power cable when you are turning the printer on or off as this may cause a fire, an
electric shock or damage to the printer.
 Do not turn the power off during printing as this may cause a media jam or damage to the printer.
 Do not turn the power off while the ONLINE lamp is blinking as this may cause loss or corruption of the data being
downloaded.
 How to turn the power on
If the printer is connected to a host computer, it is recommended to turn the printer on first and then the host
computer.
While the printer is turned off, press the [POWER] button for a few seconds.
1
The POWER lamp on the control panel lights.
2
If the printer is connected to a host computer, the ONLINE lamp lights.
 Approx. 30 seconds will be required to complete the loading of Open Type fonts after the power is turned on. The
ONLINE lamp starts blinking (interval: 0.5 sec.) after 10 seconds have passed after the power has come on. When
the loading of Open Type fonts is completed, the ONLINE lamp status is changed to lit. While the ONLINE lamp is
blinking, print data can be received; however, printing of files including Open Type fonts is not possible.
 When the ERROR lamp lights, an error has occurred in the printer.
For details, refer to  P.26 "12. Troubleshooting".
 How to turn the power off
If the printer is connected to a host computer, it is recommended to turn the host computer off first and then the
printer.
1 Check that the ONLINE lamp on the control panel is lighting (not blinking).
Press the [POWER] button for a while. All the lamps will go out and the printer will be turned off.
2
If the printer is connected to a host computer, check that the ONLINE lamp on the control panel has gone out.
16 8. Turning the Printer On and Off