Advertisement
4. Turning the Printer ON/OFF
CAUTION!
Use the power switch to turn the printer On/Off. Plugging or unplugging the Power Cord to turn the
printer On/Off may cause fire, an electric shock, or damage to the printer.
When the printer is connected to your host computer it is good practice to turn the printer ON
before turning on your host computer and turn OFF your host computer before turning off the
printer.
4.1 Turning ON the Printer
1. To turn ON the printer power, press the Power
Switch as shown in the diagram below. Note that
( | ) is the power ON side of the switch.
2. Check that the ON LINE message appears in the
LCD Message Display and that the ON LINE and
POWER LED lights are illuminated.
NOTE:
If a message other than ON LINE appears on the display or the ERROR LED lamp is illuminated, refer to
Owners manual, Error Messages.
4.2 Turning OFF the Printer
CAUTION!
1. Do not turn off the printer power while the media is being printed as this may cause a paper jam
or damage to the printer.
2. Do not turn off the printer power while the ON LINE lamp is blinking as this may cause damage
to your computer.
1. Before turning off the printer Power Switch verify
that the ON LINE message appears in the LCD
Message Display and that the ON LINE LED light
is on and is not flashing.
2. To turn OFF the printer power, press the Power
Switch as shown in the diagram below. Note that
(O) is the power OFF side of the switch.
< For EU only >
TOSHIBA TEC Europe Retail Information Systems S.A
Rue de la Célidée 33 BE-1080 Brussels
www.toshibatec-eu.com
Copyright © 2012
by TOSHIBA TEC CORPORATION
All Rights Reserved
84-4 Minamicho, Mishima-shi, Shizuoka-ken,
JAPAN
E-8
Power Switch
Power Switch
PRINTED IN INDONESIA
E
EO1-33097C
Advertisement
