Resetting Your Device; Resetting With The Reset Button - Inseego Wavemaker PRO User Manual

Resetting your Device

You can reset your FW2010e CPE to factory settings using the RESET button on the device or from the
Mobile App, Admin Web UI, or Inseego Connect.
CAUTION! Resetting returns your FW2010e to factory settings, including the Admin password.

Resetting with the RESET Button

The master reset button is in a small hole located in the SIM compartment on the bottom of the
FW2010e device. This button returns the device to factory settings, including
password.
To reset the FW2010e from the RESET button:
1. Unscrew the protective shield over the SIM compartment using a Phillips-head screwdriver.
1. Place the RESET end of the provided SIM tool (or one end of an unfolded paper clip) into the
master reset button hole.
2. Press for five to six seconds, then your
3. Check the indicator LED (see Indicator LED on the previous page) to make sure the FW2010e is
working correctly.
4. Reattach the protective shield cover to a torque of 1.2Nm (0.885 ft/lb).
5G OUTDOOR CPE FW2010e USER GUIDE
FW2010e will restart.
resetting the Admin
48