Software Update Tab
Software updates are delivered to the FW2010e automatically over the mobile network. This tab
displays your current software version, last system update information, software update history, and
allows you to check for new software updates.
Current Software
Software Version: The version of the software currently installed on your FW2010e.
Automatic Software Update
By default, software updates are automatically delivered to your FW2010e. This setting allows you to
turn off automatic software updates. If you do not want software updates automatically delivered,
move the ON/OFF slider to OFF.
Check for Software Update
Checked for Update: The date and time the FW2010e last checked to see if an update was available.
Update Status: This is area is usually blank. If you check for an update, the results display.
Check for Update: Click this button to manually check for available software updates. If a new
software update is available, it is automatically downloaded.
Last Software Update
This section displays details about the last software update.
Software Update History
This section displays details of the last updates that have been downloaded and installed to this
device. If no updates have been installed, this section is not displayed.
5G OUTDOOR CPE FW2010e USER GUIDE
16
Need help?
Do you have a question about the Wavemaker PRO and is the answer not in the manual?