Inseego Wavemaker PRO User Manual page 32

Port Forwarding Sub Tab
Port Forwarding allows specific applications to be forwarded to a particular device connected to your
network. Normally, the built-in firewall blocks incoming traffic from the Internet. Port forwarding
allows Internet users to access any server you are running on your computer, such as a Web, FTP, or
Email server.
Important:
Port forwarding creates a security risk and should not be turned on unless it is required.
Some mobile networks provide you with an IP address on their own network rather than an Internet IP
address. In this case, Port Forwarding cannot be used, because Internet users cannot reach your IP
address.
NOTE:
When IP Passthrough is turned on, you will not be able to make changes to the Port
Forwarding settings. Go to Advanced > LAN and turn IP Passthrough off.
Port Forwarding
Port Forwarding: To turn on port forwarding, move the ON/OFF slider to ON. To turn off port
forwarding, so that no inbound traffic is forwarded to a LAN client, move the slider to OFF.
Applications
Check the box next to each Port Forwarding application that you want to allow.
To forward all inbound WAN traffic on a specific port to a single LAN client, enter the IP address of the
target device in the Application IP Address field.
5G OUTDOOR CPE FW2010e USER GUIDE 32