Inseego Wavemaker PRO User Manual page 23

Network Selection
Allow devices to connect to the mobile network when roaming:
cellular data and prevent access to the mobile network when roaming.
Network Technology:
use the drop-down to select
Enable automatic network selection: When the ON/OFF slider is ON, your FW2010e automatically
selects the best 5G available network and you cannot use the Select a Different Network button
below.
Select Network Manually: You may wish to use this option if multiple networks are available and you
have a preference. NOTE:
Click the button to scan for available networks, then choose the preferred network.
APN Settings
APN: Enter the APN for your private network.
CAUTION! Changing the APN may cause a loss of data connectivity.
Authentication: Select the authentication method for your private network from the drop-down
(PAP, CHAP, or None).
Username: Enter the user name for your private network.
Password: Enter the password for your private network.
Click Save Changes. The device will reboot for changes to take effect.
5G OUTDOOR CPE FW2010e USER GUIDE
By default, your FW2010e is set to utilize both LTE and 5G technology. You can
LTE/UMTS.
This option is available only if Enable automatic network selection is off.
Use the ON/OFF slider to turn off
23