Inseego Wavemaker PRO User Manual page 20

To turn on automatic SIM switching or enter a SIM PIN, select Settings from the side menu. Then
select SIM Manager.
NOTE: The SIM card in your FW2010e can be locked using a PIN. If the SIM card is locked, you must
enter the PIN before connecting to the mobile network. Once entered, the PIN is remembered until
the next shutdown. You may also need to provide the existing PIN to change a SIM. The default PIN is
available from your service provider.
SIM Management
Turn ON Automatic SIM Switching: Move the ON/OFF slider to ON to turn on automatic SIM
switching. When enabled, the SIM is switched automatically if the active SIM is disconnected. When
OFF, you can manually switch between SIMs and change SIM settings.
SIM Status
Active: Select the SIM you want to be active.
SIM Slot: The SIM slot number.
IMSI: The International Mobile Subscriber Identity (IMSI) for your FW2010e. This is a unique
number, usually fifteen digits, that identifies a Global System for Mobile Communications (GSM)
subscriber.
Carrier: The cellular carrier associated with the SIM.
Connection Status: The current status of the SIM.
PIN Lock: If On, the PIN lock has been turned on, and the SIM PIN must be entered to connect
to the mobile network. If Off, the PIN lock feature is not turned on and the SIM PIN is not
required.
Priority: Indicates whether the SIM is Normal or Preferred priority.
5G OUTDOOR CPE FW2010e USER GUIDE
NOTE:
The change will take effect immediately.
20