Inseego Wavemaker PRO User Manual page 34

Custom Applications
You can add up to ten custom applications. Once defined, these applications can be turned on and off
the same way as pre-defined applications.
•
On: Check this box if you want the new application to be able to access the Internet (enabling
port forwarding).
• App Name: Enter a name for the custom application.
• Start Port: Enter the beginning of the range of port numbers to be forwarded.
• End Port: Enter the end of the range of port numbers to be
NOTE: If the application uses a single port instead of a range, type the same value for both the
Start Port and the End Port.
• Protocol: Select the protocol used by the port range from the drop-down list (TCP, UDP, or
both).
• Delete: Check this box to delete a custom application.
again to remove deleted custom applications from view on the screen.
Click Save Changes to save any changes made to the custom applications.
5G OUTDOOR CPE FW2010e USER GUIDE
forwarded.
NOTE:
Click on the Port Forwarding tab
34