Vecow MTC-1000 User Manual page 39

4.4.5.3 Miscellaneous Configuration
Figure 4-4-5-3 : Miscellaneous Configuration
State After G3
Specify what state to go to when power is re-applied after a power failure (G3
state). S0 State : System will boot directly as soon as power applied. S5 State :
System keeps in power-off state until power button is pressed.
Board Clock Spread Spectrum
Enable Clock Chip's Spread Spectrum feature.
Wake On Lan
Enable or Disable the Wake on Lan.
BIOS Lock
Enable/Disable the SC BIOS Lock Enable feature. Required to be enabled to
ensure SMM protection of flash.
RTC Lock
Enable will lock bytes 38h-3Fh in the lower/upper 128-byte bank of RTC RAM.
Flash Protection Range Registers (FPRR)
Enable Flash Protection Range Registers.
©Vecow MTC-1000 User Manual BIOS SETUP 33