Related Manuals for Jet DC-900
Summary of Contents for Jet DC-900
- Page 1 DC-900 Dust Collector Original: Operating Instructions Translations: Gebrauchsanleitung Mode d´emploi JPW (Tool) AG Tämperlistrasse 5 CH-8117 Fällanden Switzerland Phone +41 44 806 47 48 +41 44 806 47 58 www.jettools.com 10001051M 2015-04...
-
Page 2: Ce Conformity Declaration
CE-Conformity Declaration Product: Dust Collector DC-900 Stock Number: 10001051M Brand: JET Manufacturer: JPW (Tool) AG, Tämperlistrasse 5, CH-8117 Fällanden, Switzerland On our own responsibility we hereby declare that this product complies with the regulations * 2006/42/EC Machinery Directive * 2004/108/EC EMC Directive (Electro Magnetic Compatibility) - Page 3 Dear Customer, Many thanks for the confidence you have shown in us with the purchase of your new JET-product. This manual has been prepared for the owner and operators of a DC-900 dust collector to promote safety during installation, operation and maintenance procedures.
- Page 4 Ø100mm F….Legs (4) Never reach into the machine while it Dust inlet 900 m³/h G….Casters (4) is operating or running down. Air flow H….Base Vacuum pressure 1050Pa To reduce the risk of injury from I…..Hose Collector bag capacity moving parts, always keep inlet port J….Motor support housing Overall (LxWxH) 1555x815x380mm...
- Page 5 Attach with bolts and washers. Place the filter bag (A) over the bag Attach the legs to the base: support housing. Turn the motor-bag-support-leg Place a bag clamp (B) over the bag assembly gently right side up and set Attach 2 legs to the motor and close the clamp.
- Page 6 Note: make sure the bag is fastened Connections and repairs to the securely so that no dust will escape electrical equipment may only be 8. Trouble shooting during operation. carried out by qualified electricians. Unit doesn’t start *No electricity- 6. Machine operation check mains and fuse.