Advertisement
Attach with bolts and washers.
Attach 2 legs to the motor
assembly:
Turn the motor-bag-support assembly
upside down.
Place plastic spacers (O, Fig 4)
between motor assembly and legs.
Attach legs with medium bolts and
washers.
Fig 4
Attach 2 legs and handle to bag
support:
Place plastic spacers (O, Fig 5)
between bag support and legs.
Fig 5
Align handle (C) as shown.
Attach with long bolts washers and
nuts.
Attach the legs to the base:
Turn the motor-bag-support-leg
assembly gently right side up and set
it to the base.
Locate the motor side (A, Fig 6) and
the bag side (B) of the base.
Note: the holes for the legs of the bag
side (B) are closer to the casters.
Fig 6
Attach with short bolts washers and
nuts.
Attach filter bag hanger:
Attach filter gag hanger (M) with short
bolts washers and nuts.
Fig 7
Install the filter bag:
Attach the loop of the filter bag to the
filter bag hanger (M).
Place the filter bag (A) over the bag
support housing.
Place a bag clamp (B) over the bag
and close the clamp.
Fig 8
Note: make sure the bag is fastened
securely so that no dust will escape
during operation.
Install the collection bag:
Place a collection bag (E) over the bag
support housing.
Place a bag clamp (B) over the
collection bag and close the clamp.
Fig 9
Advertisement
