Data Report - netvox R311CA User Manual

5. Data Report

The device will immediately send a version packet report along with an uplink packet including dry contact status and
battery voltage.
Data will be reported by default setting before any configuration.
Default setting:
Maximum Time: 3600s
Minimum Time: 3600s (Detect the current voltage value every 3600s by default setting)
Battery Change: 0x01 (0.1V)
R311CA status:
When the R311CA status changes, it will send a warning report.
Dry contact open: 1
Dry contact close: 0
The reported data is decoded by the Netvox LoRaWAN Application Command document and
http://loraresolver.netvoxcloud.com:8888/page/index
Data report configuration and sending period are as following:
Min Interval
(Unit:second)
Any number between
1~65535
Example of ConfigureCmd
FPort：0x07
Bytes 1
CmdID
CmdID– 1 byte
DeviceType– 1 byte – Device Type of Device
NetvoxPayLoadData– var bytes (Max=9bytes)
Max Interval
(Unit:second)
Any number between
1~65535
1
DeviceType
Reportable Change
Can not be 0.
Var (Fix =9 Bytes)
NetvoxPayLoadData
5
Current Change≥
Reportable Change
Report
per Min Interval
Current Change＜
Reportable Change
Report
per Max Interval