GEM eSyStep Q50 Operating Instructions Manual page 38

11 Specific data IO-Link (pin 6)
11.4.29 Operating times
The current valve travel times can be read out with the Operating times parameter.
Index Sub- Off- Access
In- set Rights
dex
0x62 1 0 RO
2 8 RO
Description of parameter values
Index name
Operating times
11.4.30 Drive sets
The force of the actuator can be influenced with the Drive sets parameter when the valve is initialized and during initialization.
Index Sub- Off- Access
In- set Rights
dex
0x90 2 8 R/W
3 16 R/W
Description of parameter values
Index name
Drive sets
Force initialization
Force settings
Actuator size
AG0 and AG1
GEMÜ Q50 eSyStep
Positioner (Code S0, S5, S6)
Length Index name
8 bits Operating times
8 bits
Parameter Values
Open 0 to 255
0 to 25.5 s
Close 0 to 255
0 to 25.5 s
Length Index name
3 bits Drive sets
3 bits Force initialization
Parameter Values
Force 1 ... 6
1 ... 6
Setting parameter
Parameter Type
Open uint:8
Close uint:8
Read out operating time (in tenths of seconds) from end po-
sition CLOSED to end position OPEN.
Read out operating time (in tenths of seconds) from end po-
sition OPEN to end position CLOSED.
Parameter Type
Force uint:16
uint:16
Set the force of the valve. Preset at the factory depending on
the valve type.
Set the force during initialization. Preset at the factory de-
pending on the valve type.
1
6
38 / 53
Default Values
0 0 to 255,
0 to 25.5 s
0 0 to 255,
0 to 25.5 s
Description
Default Values
- 1 ... 6
- 1 ... 6
Description
Force
Minimum force
Maximum force
www.gemu-group.com