9 Installation
9.4 Installing on the housing using the mounting
flange
1. Before installing the actuator, machine the housing in ac-
cordance with the borehole pattern in the chapter "Di-
mensions" so that the actuator can be guided through the
recess.
2. Guide the actuator through the recess in the housing. The
actuator's mounting flange must be flush with the hous-
ing.
3. Connect the mounting flange and housing using appro-
priate screws and washers (not included in the scope of
delivery).
GEMÜ Q50 eSyStep
Positioner (Code S0, S5, S6)
14 / 53
www.gemu-group.com