GEM eSyStep Q50 Operating Instructions Manual page 29

11.4.14 Function tag
A text with 32 characters can be stored in the device with the Function tag parameter.
For example, installation location, function, installation date, etc.
Index Sub- Off- Access
Index set Rights
0x19 0 0 R/W
11.4.15 Location tag
A text with 32 characters can be stored in the device with the Location tag parameter.
For example, installation location, function, installation date, etc.
Index Sub- Off- Access
Index set Rights
0x1A 0 0 R/W
11.4.16 Device Status
The simple device status can be read out with the Device Status parameter.
Index Sub- Off- Access
Index set Rights
0x24 0 0 RO
Description of parameter values
Index name
Device Status
11.4.17 Detailed Device Status
The detailed device status can be read out with the Detailed Device Status parameter.The values of the array correspond to
the IO-Link events (see chapter 12.5 Events).
Index Sub- Off- Access
Index set Rights
0x25 0 0 RO
Description of parameter values
Index name
Detailed Device Status
www.gemu-group.com
Length Index name
32 bytes Function tag
Length Index name
32 bytes Location tag
Length Index name
1 byte Device Status
Parameter Values
0
2
4
Length Index name
39 byte Detailed Device
Status
Parameter Values
Parameter
StringT
Parameter
StringT
Parameter
The valve is operating properly
The valve is operated outside the specification
The valve is in fault status
Parameter
See chapter 12.5 Events
29 / 53
11 Specific data IO-Link (pin 6)
Type Values
„**************** "
Type Values
„**************** "
Type Values
uint: 8 0
2
4
Description
Type Values
ArrayT See chapter 12.5 Events
Description
GEMÜ Q50 eSyStep
Positioner (Code S0, S5, S6)