Technical Specifications - Owon 4-CH VDS6000 Series User Manual

VIII. Technical Specifications
i. Set the probe compensation at x10 for physical probe;
ii. Under suitable operation temperature, work the device for 30+ minutes without interval;
iii. Provided the environment temperature gets 5 degrees more, or less, to self-calibrate the device
through Utility menu, via "Self Cal" option (please refer to
The following technical specifications been measured on the basis of above-mentioned operations,
Oscilloscope Part -
Bandwidth
Vertical Resolution (A/D)
Channel Q'nty
Mode
Acquisition
Sampling Rate
Input Coupling
Input Impedance
Input Supported Probe
Max Input Voltage
Bandwidth Limit
Self
VDS6074
VDS6104
VDS6074A
VDS6104A
VDS6104
VDS6104A
4
sample, peak detect, average
VDS6074
VDS6104
VDS6074A
VDS6104A
DC, AC, ground
1 MΩ ± 2%, in parallel with 15 pF ± 5 pF
x1, x10, x100, x1000
40V (DC + AC Peak)
20MHz, or fullband
５９
Cal).
70MHz
100MHz
8-bit mode 70 MHz
12-bit mode 70 MHz
14-bit mode 20 MHz
8-bit mode 100 MHz
12-bit mode 100 MHz
14-bit mode 20 MHz
8 bits
8 bits / 12 bits / 14 bits
4-CH working 250 MSa/s
2-CH working 500 MSa/s
1-CH working 1 GSa/s
8-bit mode
4-CH working 12-bit mode
14-bit mode
8-bit mode
2-CH working 12-bit mode
14-bit mode
8-bit mode
1-CH working 12-bit mode
14-bit mode
250 MSa/s
125 MSa/s
125 MSa/s
500 MSa/s
250 MSa/s
125 MSa/s
1 GSa/s
500 MSa/s
125 MSa/s