4.3
Safety devices
Safety shut-down
If an appliance is switched on but is not used for a predefined
time, it is automatically switched off.
Cooktops
Each cooking zone is switched off automatically when the cooking
zone exceeds the maximum operating duration on one power level
or heat retention level.
is displayed (Residual heat indicator).
H
PKT3:
Temperature Safety shut-down after hours:minutes
8:24
15 0
6:24
16 0
5:12
17 0
4:12
18 0
3:18
19 0
2:12
2 00
2:12
2 1 0
1:48
22 0
1:18
23 0
0:10
/
24 0
25 0
Tab. 4.4
Safety shut-down on the different power levels
PKT3:
Heat retention temperature
80–140°C
Tab. 4.5
Safety shut-down on the different heat retention levels
Switch the cooking zone back on if you want to put the
X
X
cooking zone back into operation (see the Operation chapter).
Residual heat indicator
i
While
is displayed (residual heat indicator), do not
H
touch the cooking zone or place any heat-sensitive
objects on top of it. Risk of burns and fire!
After switching it off, the cooking zone remains hot.
is displayed (Residual heat indicator).
H
After a sufficient cooling period the indicator will go out
(Temperature < 50°C on the Tepan stainless steel grill).
www.bora.com
Switch off after hours:minutes
8:00
Overheating protection
i
If the cooktop overheats, the power is reduced or the
cooktop is switched off completely.
The appliance is fitted with overheating protection. The
overheating protection can be triggered if:
cookware is heated up empty;
O
X
oil or fat is heated on high power;
O
X
a hot cooking zone is switched on again after a power cut.
O
X
Whilst the overheating protection is active, one of the following
steps is taken:
the activated power setting is switched back to the previous
O
X
level;
the power setting
can no longer be switched on;
ß p
O
X
the set power level is reduced;
O
X
the cooktop switches off completely.
O
X
After a sufficient cooling period, the cooktop can be used again.
Childproofing feature
i
If a single cooktop is operated without a cooktop
extractor, removal of the knob ring can prevent the
appliance from being switched on accidentally or without
permission.
Appliance description
EN
13