Table of Contents
Advertisement
EN
Installation
5
Fig. 5.21
Standard connection of appliances that connect at
the rear (PKT3)
[1]
Cooktop
[2]
Rear cooking zone (zone 2)
[3]
Front cooking zone (zone 1)
[4]
Rear cooking zone control knob (zone 2)
[5]
Front cooking zone control knob (zone 1)
Connect the port on the back of the left control knob [5] to
X
X
the "zone 1" port on the cooktop [1].
Connect the port on the back of the right control knob [4] to
X
X
the "zone 2" port on the cooktop [1].
Connecting the cooking zones when the cooktop is
installed rotated by 180°
5
Fig. 5.22
Connecting the cooking zones when the cooktop is
installed rotated by 180° and the ports are on the
rear of the appliance (PKT3)
20
1
2
3
4
1
2
3
4
[1]
Cooktop
[2]
Rear cooking zone (zone 1)
[3]
Front cooking zone (zone 2)
[4]
Rear cooking zone control knob (zone 1)
[5]
Front cooking zone control knob (zone 2)
Connect the port on the back of the left control knob [5] to
X
X
the "zone 2" port on the cooktop [1].
Connect the port on the back of the right control knob [4] to
X
X
the "zone 1" port on the cooktop [1].
Using the configuration menu, set the correct allocation of the
X
X
cooking zones in the control knob display (see configuration
menu – 0° or 180° installation).
5.8.2 Establishing contact between the
cooktop extractor and cooktops
1
Fig. 5.23
Establishing contact between the cooktop extractor
and cooktops
[1]
Cooktop extractor communication cable ports (x 2)
[2]
Cooktop communication cable port
[3]
Ribbon cable
Using the communication ports provided, connect the
X
X
cooktop extractor [1] to the cooktop or cooktops [2].
Only use the cables supplied in the scope of delivery.
X
X
i
The full range of functions on the appliances will only
be available if the cooktop extractor and cooktops are
connected correctly.
5.8.3 Connecting the power supply
Observe all national and regional laws and regulations as well as
X
X
the supplementary regulations of the local utility companies.
i
The appliances may only be connected to the mains power
supply by certified specialists. The specialist also assumes
responsibility for the proper installation and commissioning.
2
ZONE1 INTERF. COM1 ZONE2
ZONE1 INTERF. COM1 ZONE2
3
www.bora.com
Advertisement
Table of Contents
