4 Mechanical Mounting
Check to ensure that there is no other electronic or plumbing installed inside the
wall before drilling holes.
step 4 Secure the wall-mounting bracket to the wall firmly with the supplied expansion bolt sets.
step 5 Lift the inverter and slide it down along the wall-mounting bracket to make sure they
match perfectly. Use the fastener set to lock the device.
- - - - E E n n d d
4.6 Connecting the Communication Module (Optional)
Connect the communication module GPRS, WiFi, or E-Net to the communication
accessory port at the bottom of the inverter.
For detailed connection description of the communication module, refer to
related user manual.
20
User Manual