Dismantling The Inverter; Disposal Of The Inverter - Sungrow SG5KTL-MT User Manual

User Manual
step 7 Lay the tool in the location of snap and press the tool down. Remove the AC connector,
ensure that the AC wiring terminals are voltage-free via a multimeter, and remove the
AC wires.
step 8 Install the MC4 waterproof plugs and AC waterproof cover.
For further disconnection and reconnection instructions, please visit the
webpage of respective component manufacturer.
- - - - E E n n d d

8.2 Dismantling the Inverter

Risk of burn injuries and electric shock!
Do not touch any inner live parts until 10 minutes after disconnecting the
inverter from the utility grid, the PV inputs and the battery module.
step 1 Refer to "Electrical Connection" for the inverter disconnection of all cables in reverse
steps.
step 2 Dismantle the inverter referring to "Mechanical Mounting" in reverse steps.
step 3 If necessary, remove the wall-mounting bracket from the wall.
step 4 If the inverter will be reinstalled in the future, please refer to "Inverter Storage" for a
proper conservation.
- - - - E E n n d d

8.3 Disposal of the Inverter

Users take the responsibility for the disposal of the inverter.
Some parts and devices of the inverter, such as the capacitors, may cause
environment pollution.
Do not dispose of the product together with household waste but in accordance
with the disposal regulations for electronic waste applicable at the installation
site.
8 System Decommissioning
53