User Manual
4.4 Moving the Inverter
To install the inverter, remove the inverter from the packaging and move it to the
installation site. Follow the instructions below as you move the inverter:
Always be aware of the weight of the inverter.
•
Lift the inverter by grasping the handles on both sides of the inverter.
•
Move the inverter by at least two persons or by using proper transport tool.
•
Do not release the equipment unless it has been secured firmly.
•
4.5 Installing the Inverter
Inverter is mounted onto the wall via the wall-mounting bracket enclosed in the packing.
If you do not use the supplied wall-mounting bracket, you can drill holes as per
specifications below:
step 1 Take out the wall-mounting bracket and corresponding fasteners from the packaging.
step 2 Place the wall-mounting bracket on the chosen concrete wall and adjust it to proper
position and height.
step 3 Mark positions according to holes on the wall-mounting bracket, and drill holes
according to the marks made before.
f f i i g g u u r r e e 4 4 - - 1 1 Dimensions of the wall-mounting bracket (figures in mm)
4 Mechanical Mounting
19