Product Identification Information - Perkins 400 Series Operation And Maintenance Manual

24
Product Information Section

Product Identification Information

Product Identification
Information
Engine Identification
Perkins engines are identified by a serial number.
This number is shown on a serial number plate that is
mounted above the fuel injection pump on the right
hand side of the engine block.
An example of an engine number is HHU000001J.
HH
U
Engines that are built in Japan will have a (J).
Engines that are built in North America will have a
(N).
000001
J
Perkins dealers or Perkins distributors need all of
these numbers in order to determine the components
that were included with the engine. This permits
accurate identification of replacement part numbers.
Serial Number Plate
Illustration 24
Typical serial number plate
The Serial Number Plate is located above the fuel
injection pump on the right side of the cylinder block.
i02216958
Type of engine
Built in the United Kingdom
Engine Serial Number
Year of Manufacture
i02157258
g01094203
The following information is stamped on the Serial
Number Plate: Engine serial number, Model and
Arrangement number.
Reference Numbers
Information for the following items may be needed to
order parts. Locate the information for your engine.
Record the information in the appropriate space.
Make a copy of this list for a record. Keep the
information for future reference.
Record for Reference
Engine Model
Engine Serial number
Engine Low Idle rpm
Engine Full Load rpm
Primary Fuel Filter
Water Separator Element
Secondary Fuel Filter Element
Lubrication Oil Filter Element
Auxiliary Oil Filter Element
Total Lubrication System Capacity
Total Cooling System Capacity
Air Cleaner Element
Fan Drive Belt
Alternator Belt
Emissions Certification Film
A typical example is shown.
SEBU7992-05
i02164876
i07790641