Table of Contents
Advertisement
Network Connection Status
Paper
Power
Error
LED
LED
LED
N
O
N
O
N
O
N
O
N
O
N
O
* The LED flashing pattern is: lighting for 320 ms followed by a pause for 320 ms.
Error Status
There are three possible error types: automatically recoverable errors, recoverable errors, and unrecoverable
errors.
Automatically Recoverable Errors
• Head temperature error
• Cover open error (in the middle of printing)
• TM-Intelligent function error
Recoverable Errors
• Autocutter error
Instead of closing the roll paper cover, you can make the printer recover from the error using a
dedicated command, however, doing so will cause the printer to go offline due to a cover open
error.
Wi-Fi
Ethernet
LED
LED
O
N
O
O
F
O
O
O
N
O
O
F
O
F
F
O
O
O
The printer recovers from the error when the head
temperature drops.
The printer recovers from the error when the roll paper
cover is closed.
The printer recovers from the error when the printer
settings are corrected.
An error occurs if the cutter is locked due to fallen foreign material or
similar cause. Although automatic recovery is performed even if there
is only slight locking, if automatic recovery is not performed, remove
foreign material and paper jams, and close the roll paper cover to
perform recovery.
O: OFF N: ON F: Flashing
LED
-
Connecting via Wi-Fi
-
Wi-Fi (An IP address has not been
acquired)
-
Connecting via Ethernet
-
Ethernet (An IP address has not been
acquired)
-
Starting the network firmware
-
Not connected to a network
Chapter 1 Product Overview
: Ignore the LED light
-
Printer Status
22
Advertisement
Table of Contents
