Tablet Devices Supported by the Network Tethering
Operation of this function has been checked with iOS devices running iOS 10.1 or later.
Firmware Versions that Supports the Network Tethering
3.03A ESC/POS or later, or 3.03B ESC/POS or later
• See
• See
Enabling the Tethering Function
Enable the tethering function of the printer using Epson TM Utility for iOS, TM-m30II Utility, or in the
software settings mode.
Enabling by Using Epson TM Utility
Select [Change Printer Settings] - [Network tethering] in that order to enable (or disable) the tethering
function.
See
"Download" on page 85
"Self-test Mode" on page 64
to check the firmware version of the printer.
"Utilities" on page 84
to update the firmware.
for information on how to get Epson TM Utility.
Chapter 3 Advanced Usage
76