Setting/Check Modes - Epson TM-m30II-NT Technical Reference Manual

Setting/Check Modes

As well as print mode, the following modes are also provided for making various printer settings and checking
items.
• Self-test mode
• NV graphics information print mode
• Receipt Enhancement information print mode
• Software settings mode
• Restore default values mode
• Interface setup mode
• Hexadecimal dumping mode
The self-test mode or hexadecimal dumping mode is selected depending on the operation performed when the
power is turned on.
NV graphic information print mode, Receipt Enhancement information print mode, Software settings mode,
and Restore default settings mode are selected depending on the Feed button operation performed during a
self-test.
Close the roll paper cover, and turn on the printer while pressing the Feed button.
Briefly press the Feed button.
Continuing the self-test
Press the Feed Press the Feed
button once briefly button twice briefly
and then hold it and then hold it
down. down.
Receipt
NV Graphics
Enhancement
Information
Information
Open the roll paper cover, and turn on the printer while pressing the Feed
button, and then close the roll paper cover.
Hexadecimal dumping
Self-test
Hold down the Feed button.
Mode selection guidance
Press the Feed button Press the Feed
button four times
three times briefly
and then hold it briefly and then hold
down.
Restore Default
Software Settings
Press the Feed button
five times briefly and
then hold it down.
it down.
Interface Setup
Values
Chapter 3 Advanced Usage
Press the Feed Press the Feed
button six times
button seven times
briefly and then hold briefly and then hold
it down.
it down.
TM-Intelligent
Peripheral Device
settings information
Information print
print
62