Part Names And Functions - Epson TM-m30II-NT Technical Reference Manual

Part Names and Functions

1
2
3
1 Roll paper cover
2 Panel LED
3 NFC Tag
4 Cover open lever
5 Feed button
6 Power switch
7 Status sheet button
Open this cover when loading or replacing roll paper.
For details on LED, see "Panel LED" on page
A mark is printed here to indicate the position of the NFC tag. To establish communication
with an NFC device, bring the device close to this mark.
For the functions using the NFC tag, refer to
Operate this lever to open the roll paper cover.
Pressing this button once feeds roll paper for one line. Hold down this button to continue
feeding roll paper.
Turns the printer on or off.
Use this button to print a status sheet on interfaces or initialize the settings on interfaces.
When turning off the printer without using the power switch, it is recommended to send a power-
off command to the printer. If you use the power-off sequence, the latest maintenance counter
values are saved. (Maintenance counter values are usually saved every two minutes.)
For information about ESC/POS commands, see the ESC/POS Command Reference.
6
5
4
16.
"Useful Functions for Smart Devices" on page
Chapter 1 Product Overview
7
27.
15