Table of Contents
Advertisement
Environmental Conditions
Temperature/
Operating
Humidity
Storage
Vibration
When packed
resistance
Shock resistance
When packed
When unpacked
Acoustic noise (operating)
Drip proof function*
Altitude
∗ The value measurements are equivalent to JISC0920 (IEC60529:2001) standard. Therefore, safety standard
application, and failure and breakage of the printer are not guaranteed.
5 to 45°C {41 to 113°F}, 10 to 90% RH (See the operating temperature and
humidity range below.)
-20 to 60°C {-4 to 140°F}, 10 to 90% RH (except for paper)
[%RH]
90
80
60
Operating
environment
40
range
20
10
0
0
10
Frequency: 5 to 55 Hz
Acceleration: Approximately 19.6 m/s
Sweep: 10 minutes (half cycle)
Time: 1 hour
Orientation: x, y, and z
Must not be any problems with the visible or operational problems to the
exterior of or inside the machine after being subject to vibration.
Packing: Epson standard package specifications
Height: 60 cm {23.62"}
Orientation: 1 corner, 3 edges, and 6 surfaces
Must not be any problems with the visible or operational problems to the
exterior of or inside the machine after being subject to being dropped.
Height: 5 cm {1.97"}
Orientation: Lift one edge and release it (for all 4 edges)
Must not be any problems with the visible or operational problems to the
exterior of or inside the machine after being subject to being dropped
when not operating.
Approximately 55 dB (bystander position)
Note:
The values above are measured in the Epson evaluation condition.
Acoustic noise differs depending on the paper used, printing contents,
and the setting values, such as print speed or print density.
IPX2 equivalent
Note:
At front eject position.
3,000 m or less
34°C, 90%
40°C, 65%
45°C, 50%
20
30
40
50
[°C]
Ambient temperature
2
{2G}
Appendix
107
Advertisement
Table of Contents
