Connection Procedure - Epson TM-m30II-NT Technical Reference Manual

Enabling by Using TM-m30II Utility
Select [Detailed Settings] - [Interface] - [Network tethering] in that order, and then enable (or disable) it. For
more details, see TM-m30II Utility User's Manual.
Enabling in the Software Settings Mode
Select [3. Customize Value Settings] - [13. Other Settings] - [8. Network Tethering] in that order, and then
enable (or disable) it.
See "Software Settings" on page

Connection Procedure

Follow the procedure below to connect a tablet using the tethering function.
1
Connect the printer to a wired network.
2
Turn on the printer, and then wait until the Ethernet LED stops flashing and stays on.
3
On the iOS device, tap [Settings] - [Wi-Fi], and disable Wi-Fi.
48.
Chapter 3 Advanced Usage
77