Paper Specifications - Epson TM-m30II-NT Technical Reference Manual

Paper Specifications

Paper types
Form
Size Roll paper diameter
Roll paper core
Roll width when taken up
Paper width
Paper thickness
Specified original paper type
• Paper must not be pasted to the roll paper core.
• To keep the print quality, it is recommended to change the print densities for each roll paper.
See "Software Settings" on page
• Use of thermal paper with a pre-printed recording surface should be avoided. Using it can cause
the thermal head to stick to the thermal paper surface during printing, and cause printing
failure and other problems. The pre-printing also can result in reduced print density. Using
thermal paper with a pre-printed recording surface, pre-printing should be done in accordance
with the conditions (ink type, printing and other conditions) recommended by the paper
manufacturer, and the thermal paper should be checked to ensure that there is no faulty
printing, loss of print density, or other problems.
Paper width 58 mm
Specified thermal paper
Roll paper
83 mm {3.27"} maximum
Outside: 18 mm {0.71"}
58 + 0.5/-1.0 mm {2.28 + 0.02/-0.04"}
57.5 ± 0.5 mm {2.26 ± 0.02"}
Maximum of 80 μm, minimum of 48 μm
TF50KS-EY, TF60KS-E
PD160R, PD190R
P220AGB-1
AP45KS-ND, AP50KS-ND
F50417(55), F50417(48)
KT55FA, KT48FA, KT55PF, KT48PF
48.
Paper width 80 mm
80 + 0.5/-1.0 mm
79.5 ± 0.5 mm
NIPPON Paper Industries Co., Ltd.
OJI Paper Mfg. Co., Ltd.
Mitsubishi Paper Mills Limited.
Jujo Thermal Oy
Mitsubishi HiTec
Koehler Paper Group
Appendix
104