Repair Work - BÖWE M12 Instruction Manual

Hide thumbs Also See for M12:
Table of Contents

Advertisement

2 Safety Regulations
Attention: Drain distillation residues only when the green lamp on the
Attention: Check the liquid level before opening the still door
Attention: Do not allow distillation residues to reach the sewer system
Requirements for the owner and operating personnel
According to the legal stipulations of the German accident prevention
regulations (BGR 500 chapter 2.14), special knowledge is required for the
operation and maintenance of drycleaning systems. A person with this special
knowledge must regularly be present during the operation of drycleaning
systems.
As a person / body who runs a plant one is obliged to have the refrigerating plant of
the dry cleaning machine inspected annually with regard to tightness.
2.4

Repair Work

Only skilled workers with suitable protection devices and work tools are authorized to carry out
repairs. Make sure that there are no solvent emissions.
During repair and cleaning work:
Turn main switch off
Close the stop valves on the supply lines (steam, condensate and compressed air).
Make sure that the system cannot be turned on without permission (close off and put up
a sign "DO NOT TURN ON - REPAIR WORK " )
Always remove the main fuse when working on the electrical system.
Use only original fuses to replace defective ones.
When working on pneumatic control parts, make sure that there is no pressure in the system.
Only specially trained refrigeration technicians are authorized to make repairs to the
refrigeration unit.
All spare parts used must comply with the technical standards set by the manufacturer.
4
still is lit.
The collecting tank must hold the amount that is expected to
be drained and must be temperature and solvent-resistant at
up to 150 °C (302 °F)
or garbage. You must dispose of these residues according to
country-specific regulations on special waste.
2
2.4
M12/M15/M18

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

M15M18

Table of Contents