6. Operation
6.1 First Startup
The BÖWE Customer Service department is responsible for carrying out the first startup.
Attention: Before opening the switch panel or removing paneling,
set the main switch to " 0".
6.1.1. Preparatory Work
Set up the supply systems (electrical current, cooling water, compressed air, steam and condensate
line).
6.1.2. Filling Machine With Solvent
You must use solvents that have a flash point that is higher than the temperature stated on the
machine nameplate.
The amount of solvent needed is:
Machine M12 tank I:
Machine M15 tank I:
Machine M18 tank I:
Machine M12 tank III:
Machine M15 tank III:
Machine M18 tank III:
Total filling amount M12:
Total filling amount M15:
Total filling amount M18:
Total filling amount M12 for the 3-tank model:
Total filling amount M15 for the 3-tank model:
Total filling amount M18 for the 3-tank model:
For machines with 2 economy filters: + 40 l (10.5 US gal)
For machines with 2 economy filters and 1 cartridge filter: + 55 l (14.5 US gal)
Attention: This solvent is a powerful fat solvent. Wear gloves when
handling solvent and apply protective skin ointment to hands when
done. Do not smoke.
Immediately change any clothing that is wet with solvent.
If you get solvent in your eyes,:
•
•
If there is no suction from the pump, pour about 5 liters (1.3 US gal) of
solvent into the button trap. Check that the direction of rotation is
correct.
25
approx.60 l / 15.8 US gal
approx.75 l / 19.8 US gal
approx.90 l / 23.8 US gal
approx.60 l / 15.8 US gal
approx.75 l / 19.8 US gal
approx.90 l / 23.8 US gal
approx. 220 l / 58.1 US gal
approx. 260 l / 68.7 US gal
approx. 300 l / 79.2 US gal
rinse them thoroughly with water
and see a doctor.
approx. 280 l / 73.9 US gal
approx. 330 l / 87.1 US gal
approx. 380 l / 100.4 US gal
6.
6.1
M12/M15/M18