Interior Illumination Of The Oven; How To Change The Oven Light; Disassembling And Assembling The Oven Door; Disassembling Of The Oven Door - Rommelsbacher KM 3300 Instruction Manual

Interior illumination of the oven

The appliance is equipped with an interior illumination. The lamp glows during the whole operation time
of the oven. Once the operating time is over, the lamp turns out automatically.

How to change the oven light

• Carefully unscrew the lamp cover, unscrew the defective illuminant.
• Insert a new bulb (heat resistant - 220-240 V ~ 25 W, E14, T 300 ° C) into the thread and screw it in by
hand.
• Then insert the lamp cover into the thread and screw in hand-tight.

Disassembling and assembling the oven door

The oven door is designed in such a way that, under normal conditions of use, there is no impurity
between the glass plates of the double glazing. The oven door should only be disassembled and cleaned if
heavily soiled. Proceed as follows:

Disassembling of the oven door

• Open the oven door.
• Loosen right and left screws counter-clockwise and remove.
• Carefully loosen the glass plate with seal by slightly moving it back and forth and remove it upwards.
• Clean the glass plates from the inside and outside.

Assembling of the oven door

26
• ATTENTION: Always unplug the power cord before changing
the lamp!
• ATTENTION: Before changing the lamp, always allow the appliance
to cool down!
• ATTENTION: Always unplug the power cord before disassembling
the oven door!
• ATTENTION: Before disassembling the oven door always allow the
appliance to cool down!
• ATTENTION: Always unplug the power cord before assembling
the oven door!
• ATTENTIOPN: The appliance may be operated only with completely
assembled door!