molex 207129 Series Manual
Hand crimp tool, type 4d
Hide thumbs
Also See for 207129 Series:
- Application tooling specification sheet (16 pages) ,
- Specification sheet (12 pages) ,
- Manual (10 pages)
Advertisement
Hand Crimp Tool For S
ATA Power Cable Crimp Receptacle
HAND CRIMP
TOOL
FEATURES
A full cycle ratcheting hand tool ensures complete crimps
Ergonomic soft grip handles for comfortable crimping
A precision user-friendly terminal locator wire stop holds terminals in the proper crimping position
Right and Left handed applications
This tool is IPC/WHMA A-620 Class 2 compliant
This tool is RoHS compliant, however RoHS compliant is not required
SCOPE
Products: SATA Power Cable Crimp Receptacles, 18-22 AWG.
Terminal
Series No.
67581
DEFINITION OF TERMS
BEND
UP
ROLLING
BEND
DOWN
Doc No: ATS-638239900
Revision: A
Application Tooling
Specification Sheet
Terminal Order No.
Reel
67581-0000 67581-0001
67581-0002 67581-0009
67581-0010 67581-0011
67581-0012 67581-0019
Customer to cut off terminal from reel: 0.50mm (.020") maximum Cut-off Tab.
STRIP
LENGTH
TWISTING
LANCE HEIGHT
Release Date: 02-11-11
Revision Date: 02-11-11
s
Wire Size and Type Insulation Diameter Strip Length
AWG
mm²
mm
18-22
UL1007
1.40-2.40 .055-.094 3.50
BELL MOUTH
SEAM
CONDUCTOR CRIMP HEIGHT
INSULATION CRIMP
HEIGHT
UNCONTROLLED COPY
TYPE 4D
Order No. 63823-9900
In.
mm
In.
.138
BRUSH
CUT-OFF
TAB
Page 1 of 7
Advertisement
Table of Contents
Related Manuals for molex 207129 Series
Summary of Contents for molex 207129 Series
- Page 1 Hand Crimp Tool For S ATA Power Cable Crimp Receptacle HAND CRIMP TOOL Application Tooling TYPE 4D Specification Sheet Order No. 63823-9900 FEATURES A full cycle ratcheting hand tool ensures complete crimps Ergonomic soft grip handles for comfortable crimping A precision user-friendly terminal locator wire stop holds terminals in the proper crimping position Right and Left handed applications This tool is IPC/WHMA A-620 Class 2 compliant This tool is RoHS compliant, however RoHS compliant is not required...
-
Page 2: Operation
.138 2.90 .114 39.20 OPERATION CAUTION: Install only Molex terminals listed above with this tool. Do not crimp hardened objects as damage can occur to the tool or die. Open the tool by squeezing the handles LOCATOR together. At the end of the closing stroke, the... - Page 3 Hand Crimp Tool For S ATA Power Cable Crimp Receptacle RELEASE LOCATOR BUTTON LOCATOR LOCATOR PUSHED THRU TOOLING LOCATOR BUTTON PUSHED IN TERMINAL Figure 3 TERMINAL 3. While holding the locator button in, load the terminal into the proper nest opening in the locator based on the wire gauge or terminal type markings on the hand tooling.
- Page 4 Hand Crimp Tool For S ATA Power Cable Crimp Receptacle LOCATOR 10. On some large O.D. wires, it may not be possible to insert the wire with the tool partially SQUEEZE closed. Those wires should be inserted with the HERE MAKE SURE hand tool in the open position.
-
Page 5: Maintenance
Hand Crimp Tool For S ATA Power Cable Crimp Receptacle 1. The locator must be removed before reversing the tooling. 2. Remove the M3 BHCS which is holding the upper tooling. 3. Flip the upper tooling to the opposite side and replace the M3 BHCS. Make sure the small markings on the front and back of the hand tool frame match up and are on the outside of the hand tool frame. -
Page 6: Warranty
Molex does not certify or re-certify hand tools but rather supplies the following guidelines for customers to re-certify hand tools. This tool is qualified to pull force only. See the Molex web site for the Quality Crimp Handbook for more information on pull testing. -
Page 7: Parts List
Item Number Order Number Description Quantity 63823-9900 Hand Crimp Tool Figure 13 63823-9975 Locator Assembly 63810-0104 Spring, Return 63810-0105 Spring, Ratchet Figure 13 http://www.molex.com UNCONTROLLED COPY Doc No: ATS-638239900 Release Date: 02-11-11 Page 7 of 7 Revision: A Revision Date: 02-11-11...
Need help?
Do you have a question about the 207129 Series and is the answer not in the manual?
Questions and answers