Table of Contents
Advertisement
Perform a One-Time Firmware Update For FC SR-IOV Support
Perform a One-Time Firmware Update For FC SR-IOV
Support
CR 19725764
Conditions:
Operating System: Oracle Solaris
■
Operating Protocol Mode: CNA and HBA
■
Environment: Universal HBA installed in a SPARC system, requiring FC SR-IOV
■
functionality
Issue:
If you have installed the universal HBA in a SPARC system that requires Fibre Channel
(FC) Single Root-I/O Virtualization (SR-IOV), or FC SR-IOV, support, you must update
the universal HBA firmware to version 7.03.00, at minimum. You only need to perform
this FC SR-IOV-specific firmware update one time. For future firmware updates, you can
return to the usual firmware update procedure, as described in
Firmware" on page
Workaround:
Perform the one-time, FC SR-IOV firmware update:
1. Go to the Oracle support area of the QLogic web site at:
http://driverdownloads.qlogic.com/QLogicDriverDownloads_UI/Oracle_Search.
aspx
2. Search for the universal HBA by using the HBA part number (7101674).
3. Navigate to the Boot Code table, and locate the Multi-Boot Image Update Kit for Universal
part-number (7101674) HBA.
4. Click the update kit name to save the installation file to your local file system.
5. Click the Read Me link, and follow the installation instructions in the Read Me file.
vpd r/w failed Error Messages Are Displayed
CR 19154195
Conditions:
70
Sun Storage 16 Gb Fibre Channel PCIe Universal Host Bus Adapter, QLogic Installation Guide For HBA Model
7101674 • August 2018
64.
"Updating the Universal HBA
Advertisement
Table of Contents
