Table of Contents
Advertisement
Storage Support
Note -
Mode, keep in mind that Link Aggregation Control Protocol (LACP) cannot be used on the
same port as FCoE or iSCSI.
Storage Support
This section lists the supported arrays and tape storage devices that can connect to the universal
HBA through a supported switch (see
provides the following topics:
"Array Storage Support" on page 18
■
"Tape Storage Support" on page 18
■
Array Storage Support
The universal HBA supports connecting to, via a supported switch, the following storage
devices:
Oracle ZFS Storage ZS3-2, ZS3-4, ZS3-BA, ZS4-4
■
Oracle ZFS Storage Appliance Racked System ZS4-4
■
Oracle ZFS Backup Appliance
■
Oracle FS1-2 Flash Storage System
■
Oracle's Sun Storage 2540 M2 Array
■
Oracle's Sun Storage 6180 Array
■
Oracle's Sun Storage 6540 Array
■
Oracle's StorageTek 6580, 6780 with 8 Gbps FC host interface cards
■
Oracle's Pillar Axiom 600 storage system
■
Oracle's Sun Storage 7110, 7210, 7310, 7410 unified storage systems
■
Oracle's Sun ZFS Storage 7120, 7320, 7420, 7720 appliances
■
Tape Storage Support
The universal HBA supports connecting to, via a supported switch, the following tape storage
devices:
Oracle's StorageTek SL24 Tape Autoloader
■
18
Sun Storage 16 Gb Fibre Channel PCIe Universal Host Bus Adapter, QLogic Installation Guide For HBA Model
7101674 • August 2018
If you are using a switch to connect to the Universal HBA in CNA Operating Protocol
"Switch Compatibility" on page
17). This section
Advertisement
Table of Contents
