UEFI (new x86 servers) – x86 server documentation
■
FCode (Oracle SPARC servers) – Readme file
■
QConvergeConsole GUI management tool – Online Help
■
QConvergeConsole CLI management tool – QConvergeConsole CLI User's Guide, located
■
at the QLogic web site.
Using the Fast!UTIL Utility to Determine and
Change the Operating Protocol Mode
This section contains the following topics:
"To Determine and Change the Operating Protocol Mode Using the Fast!UTIL
■
Utility" on page 41
"To Configure PXE Booting" on page 45
■
To Determine and Change the Operating Protocol Mode Using
the Fast!UTIL Utility
This procedure describes how to determine and change the operating protocol mode of the
universal HBA using the BIOS Fast!UTIL utility on legacy x86 systems.
1.
During system power-on initiation, press
To Determine and Change the Operating Protocol Mode Using the Fast!UTIL Utility
Chapter 3 • Operating Protocol Mode Configuration
.
Ctrl-Q
41