Table of Contents
Advertisement
To Install the Universal HBA
6.
Insert the universal HBA into an empty PCI Express x8 or larger slot.
Press down firmly on the universal HBA until the universal HBA is seated in its
7.
slot.
Secure the mounting bracket of the universal HBA to the case with the panel
8.
screw or clip.
9.
Replace the system case and tighten the case screws.
The universal HBA is now installed and ready for the optical or copper cables to be connected
(see
"Connecting the Cables" on page
Note -
Connecting the Cables
Attach the type of cable that is appropriate for the current configuration of the universal HBA:
30
Sun Storage 16 Gb Fibre Channel PCIe Universal Host Bus Adapter, QLogic Installation Guide For HBA Model
7101674 • August 2018
Do not power on the system until after you connect the cables.
30).
Advertisement
Table of Contents
