Table of Contents
Advertisement
To Determine and Change the Operating Protocol Mode Using the QConvergeConsole GUI
Personality type of HBA instance 1 (QLE8362) has been changed successfully.
Please power cycle machine. Make sure to change the SFP module to a compatible
one (FC) before reboot.
Note -
reboot of the system, you can perform a hot-plug out and hot-plug in of the card.
To Determine and Change the Operating Protocol
Mode Using the QConvergeConsole GUI
The QLogic QConvergeConsole GUI utility is a browser-based client/server application that
allows centralized management and configuration of QLogic adapters within the SAN. For
QLogic QConvergeConsole GUI installation and management instructions, see the ReadMe file
included in the QCC GUI installation package. Additionally, a QLogic QConverge Console
GUI User's Guide is available at the Oracle support area of the QLogic web site.
Follow these instructions to determine and change the operating protocol mode of the universal
HBA:
1.
Open a web browser.
In the address bar of the browser, specify the server where QConvergeConsole
2.
is installed:
Remote server: http://<server-IP-address>:8080/QConvergeConsole/
■
Local server: http:localhost:8080/QConvergeConsole/
■
54
Sun Storage 16 Gb Fibre Channel PCIe Universal Host Bus Adapter, QLogic Installation Guide For HBA Model
7101674 • August 2018
For systems that have hot-plug/hot swap capability, instead of initiating a full power
Advertisement
Table of Contents
