Installing The Cli For Updating The Bios And Fcode; Updating The Universal Hba Firmware; To Update The Universal Hba Firmware - Oracle Sun Storage HBA Installation Manual

Installing the CLI for Updating the BIOS and FCode

6. Click the Read Me link for additional information.
Installing the CLI for Updating the BIOS and FCode
If you need to update the Fibre Channel BIOS and FCode, you can do so by using the QLogic
QConvergeConsole command-line interface (CLI).
If you have not done so already, you can download the QConvergeConsole CLI tool from the
Software section in the Oracle support area of the QLogic web site:
http://driverdownloads.qlogic.com/QLogicDriverDownloads_UI/Oracle_Search.aspx
Follow the installation instructions in the README.TXT file. Installation instructions are also
available in the QLogic user's guides for those tools, which can also be found in the Oracle
support area of the QLogic web site.
For instructions on how to update the BIOS and FCode, see the QConvergeConsole CLI User's
Guide in the Software section in the Oracle support area of the QLogic web site.

Updating the Universal HBA Firmware

This section describes how to update the universal HBA firmware.
Note -
all other HBA-related operations, including I/O, diagnostics, and inquiries (even on the PCI
bus). You can resume any HBA-related operations after the firmware update is fully complete.

To Update the Universal HBA Firmware

1.
Obtain the image file from the QLogic web site at:
com/QLogicDriverDownloads_UI/Oracle_Search.aspx
The image file is in zip format, and named as follows:
Oracle_qle83xx_imgx.xx.xxriscy.yy.yy
Where x.xx.xx and y.yy.yy are version numbers.
64 Sun Storage 16 Gb Fibre Channel PCIe Universal Host Bus Adapter, QLogic Installation Guide For HBA Model
7101674 • August 2018
When updating firmware, do not interrupt the process. Prior to the firmware update, stop
http://driverdownloads.qlogic.