To Determine and Change the Operating Protocol Mode Using the UEFI Setup Menus
2.
From the guided search selection boxes, choose the following:
First box – Converged Network Adapters
■
Middle box – 7101674
■
Last box - The operating system used by your system.
■
3.
Click Go.
4.
From the page that is displayed, scroll down to the Boot Code table and click
Multi-boot Image for Universal HBA.
An End User Software License Agreement is displayed.
5.
Review the End User Software License Agreement, and click I Agree.
The multi-boot image .zip file is downloaded to your system.
6.
After the download is completed, navigate to the location of the.zip file on your
system, and extract the files from the .zip file.
You can now access the directories and files, including a PXE directory, from the .zip file.
7.
Navigate to the PXE directory, and double-click on the Readme.txt file to open the
file.
8.
Follow the procedure in the System Configuration section of the Readme.txt file.
To Determine and Change the Operating Protocol
Mode Using the UEFI Setup Menus
This procedure describes how to determine and change the operating protocol mode of the
universal HBA using the UEFI utility on x86 systems:
From the system, enter the UEFI setup menu.
1.
46
Sun Storage 16 Gb Fibre Channel PCIe Universal Host Bus Adapter, QLogic Installation Guide For HBA Model
7101674 • August 2018