1. Manuals
  2. Brands
  3. Oracle Manuals
  4. Adapter
  5. SG-PCIEFCOE2-Q-SR
  6. Manual

Oracle SG-PCIEFCOE2-Q-SR Manual

Sun storage 10 gbe fcoe pcie converged network adapter from qlogic
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Sun Storage 10 GbE FCoE PCIe
Converged Network Adapter From
QLogic Installation Guide For Adapter
Models SG-PCIEFCOE2-Q-SR, SG-
XPCIEFCOE2-Q-SR, SG-PCIEFCOE2-Q-
TA, SG-XPCIEFCOE2-Q-TA, 7105381, and
7105382
Part No: E20763-09
March 2017

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SG-PCIEFCOE2-Q-SR and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Oracle SG-PCIEFCOE2-Q-SR

Summary of Contents for Oracle SG-PCIEFCOE2-Q-SR

  • Page 1 Sun Storage 10 GbE FCoE PCIe Converged Network Adapter From QLogic Installation Guide For Adapter Models SG-PCIEFCOE2-Q-SR, SG- XPCIEFCOE2-Q-SR, SG-PCIEFCOE2-Q- TA, SG-XPCIEFCOE2-Q-TA, 7105381, and 7105382 Part No: E20763-09 March 2017...
  • Page 3 Oracle. Oracle Corporation and its affiliates will not be responsible for any loss, costs, or damages incurred due to your access to or use of third-party content, products, or services, except as set forth in an applicable agreement between you and Oracle.
  • Page 4 Oracle Corporation et ses affiliés déclinent toute responsabilité ou garantie expresse quant aux contenus, produits ou services émanant de tiers, sauf mention contraire stipulée dans un contrat entre vous et Oracle. En aucun cas, Oracle Corporation et ses affiliés ne sauraient être tenus pour responsables des pertes subies, des coûts occasionnés ou des dommages causés par l’accès à...

  • Page 5: Table Of Contents

    ▼ To Apply Power ................ 25 Testing the Installation ...................  27 ▼ To Verify Proper Installation (Oracle SPARC Systems) ...... 28 ▼ To Verify Attached Storage (Oracle SPARC Systems) ...... 30 ▼ To Verify Proper Installation (Oracle x86 Systems) .........  31 Updating the PXE .................. 34 PXE Operating Systems .................  34...
  • Page 6 Installing the Oracle Solaris Drivers ............ 41 Diagnostic Support for the Oracle Solaris OS .......... 42 Installing Software for the Oracle Linux, Red Hat, or SUSE Linux OS .... 43 Downloading the Oracle Linux, Red Hat, or SUSE Linux Drivers .... 43 Installing the Red Hat or SUSE Linux Drivers .......... 44 Diagnostic Support for the Red Hat or SUSE OS ........

  • Page 7: Using This Documentation

    Audience – Technicians, system administrators, and authorized service providers ■ Required knowledge – Advanced experience troubleshooting and replacing hardware ■ Product Documentation Library Documentation and resources for this product and related products are available at http:// docs.oracle.com/cd/E19613-01/index.html. Feedback Provide feedback about this documentation at http://www.oracle.com/goto/docfeedback. Using This Documentation...
  • Page 8 Sun Storage 10 GbE FCoE PCIe Converged Network Adapter From QLogic Installation Guide For Adapter Models SG-PCIEFCOE2-Q-SR, SG-XPCIEFCOE2-Q-SR, SG-PCIEFCOE2-Q-TA, SG-XPCIEFCOE2-Q-TA, 7105381, and 7105382 • March 2017...

  • Page 9: Converged Network Adapter Overview

    C H A P T E R Converged Network Adapter Overview This chapter provides a basic overview of Oracle's Sun Storage 10 GbE FCoE PCIe Converged Network Adapter, which uses Cavium, formerly QLogic, technology. This chapter also describes the various operating systems, storage, and infrastructure configurations that support the Converged Network Adapter, and lists the adapter's environmental requirements.
  • Page 10 Oracle Solaris Dynamic Reconfiguration Supports Dynamic Reconfiguration, a software mechanism that allows resources to be (DR) attached (logically added) or detached (logically removed) from the Oracle Solaris operating environment control without incurring any system downtime FCoE full offload in hardware...

  • Page 11: Operating System And Technology Requirements

    Operating System/Technology Supported Versions (minimum) Oracle Solaris OS for the x86 (64-bit) platform ■ Oracle Solaris 10 01/13 with patches 149176-02 and 145649-04, at minimum ■ Oracle Solaris 11.1 with SRU 7 To obtain the latest patches and SRUs, go to http://support.oracle.com...

  • Page 12: System Interoperability

    ■ Host Platform Support The adapter is supported by the platforms listed in Table 3, “Host Platform Support,” on page 12. For up-to-date information, see your Oracle server release notes and web pages. TABLE 3 Host Platform Support Platform Supported OS/Technology...
  • Page 13 Oracle Solaris, Linux, VMware, and Windows Sun Fire X2270 Oracle Solaris, Linux, VMware, and Windows Sun Fire X4140 Oracle Solaris, Linux, VMware, , and Windows Sun Fire X4150 Oracle Solaris, Linux, VMware, and Windows Sun Fire X4170 Oracle Solaris, Linux, VMware, and Windows...

  • Page 14: Storage Support

    Sun StorageTek SL24 tape autoloader ■ Sun StorageTek SL48 tape library ■ Sun Storage 10 GbE FCoE PCIe Converged Network Adapter From QLogic Installation Guide For Adapter Models SG-PCIEFCOE2-Q-SR, SG-XPCIEFCOE2-Q-SR, SG-PCIEFCOE2-Q-TA, SG-XPCIEFCOE2-Q-TA, 7105381, and 7105382 • March 2017...

  • Page 15: Switch Support

    Brocade Elara 8000 (FCoE top-of-rack [ToR] switch) ■ When operating with the Oracle Solaris 10 10/09 OS, logging into a Brocade Elara Caution - 8000 switch requires VLAN 1002 configuration for that port. This is not a requirement in later versions of the Oracle Solaris OS.

  • Page 16: Software Support

    Support for native multi-pathing Oracle Solaris, Linux, and Windows Boot Support The Converged Network Adapter supports the following minimum boot types: Oracle Solaris 10 01/13 for the x86 and SPARC environments ■ Oracle Solaris 11.1 for the x86 and SPARC environments ■...

  • Page 17: Environmental Requirements

    Environmental Requirements Environmental Requirements The Converged Network Adapter environmental requirements are listed in Table 6, “Converged Network Adapter Environmental Requirements ,” on page Converged Network Adapter Environmental Requirements TABLE 6 Specification Operating Non-Operating Temperature 0 C˚ to 55˚ C, noncondensing –40˚...
  • Page 18 Sun Storage 10 GbE FCoE PCIe Converged Network Adapter From QLogic Installation Guide For Adapter Models SG-PCIEFCOE2-Q-SR, SG-XPCIEFCOE2-Q-SR, SG-PCIEFCOE2-Q-TA, SG-XPCIEFCOE2-Q-TA, 7105381, and 7105382 • March 2017...

  • Page 19: Hardware Installation And Removal

    To minimize the possibility of ESD-related damage, use both a workstation antistatic mat and an ESD wrist strap. You can get an ESD wrist strap from any reputable electronics store or from Oracle as part number 250-1007. Observe the following precautions to avoid ESD-related problems: Leave the adapter in its antistatic bag until you are ready to install it in the system.

  • Page 20: Installing The Hardware

    “To Apply Power” on page 25 ■ To Install the Converged Network Adapter If the system in which you are installing the adapter is running the Oracle Solaris OS, install the two driver patches for your platform, as listed in “Operating System and Technology Requirements”...
  • Page 21 To Install the Converged Network Adapter Remove the mounting bracket screws from the adapter (See the following figure.). Remove the bracket and store it for future use. Align the new mounting bracket tabs with the holes in the adapter. Be careful not to push the bracket past the grounding tabs of the transceiver housing. Note - Ensure that the LEDs are properly aligned with the holes in the bracket.
  • Page 22 The adapter is now installed and you can connect the optical or copper cables. Sun Storage 10 GbE FCoE PCIe Converged Network Adapter From QLogic Installation Guide For Adapter Models SG-PCIEFCOE2-Q-SR, SG-XPCIEFCOE2-Q-SR, SG-PCIEFCOE2-Q-TA, SG-XPCIEFCOE2-Q-TA, 7105381, and 7105382 • March 2017...

  • Page 23: To Connect An Optical Cable

    To Connect an Optical Cable To Connect an Optical Cable The Converged Network Adapter does not allow normal data transmission on an optical Note - link unless it is connected to another similar or compatible Fibre Channel over Ethernet (FCoE) product (that is, another Converged Network Adapter or FCoE switch using compatible short range optics).

  • Page 24: To Connect A Copper Cable

    To Connect a Copper Cable To Connect a Copper Cable Use only SFP+ direct attach twinax cables approved by Oracle. The following table lists the Before You Begin part numbers for the approved twinax copper cables. Brocade Part Number Oracle Part Number...

  • Page 25: To Apply Power

    To Apply Power The following figure shows how to connect the dual-port adapter with a copper cable. Insert the other end of the copper cable into an empty SFP+ cage on the FCoE switch. After the copper cable is connected to the adapter, you can power on the system. Link Aggregation Control Protocol (LACP) cannot be used on the same port as FCoE or Note - iSCSI.
  • Page 26 The green LEDs can be seen through openings in the mounting bracket of the adapter, as shown in the following figure. Sun Storage 10 GbE FCoE PCIe Converged Network Adapter From QLogic Installation Guide For Adapter Models SG-PCIEFCOE2-Q-SR, SG-XPCIEFCOE2-Q-SR, SG-PCIEFCOE2-Q-TA, SG-XPCIEFCOE2-Q-TA, 7105381, and 7105382 • March 2017...

  • Page 27: Testing The Installation

    Slow flashing (alternating) Beaconing Testing the Installation This section contains the following topics: “To Verify Proper Installation (Oracle SPARC Systems)” on page 28 ■ “To Verify Attached Storage (Oracle SPARC Systems)” on page 30 ■ Chapter 2 • Hardware Installation and Removal...

  • Page 28: To Verify Proper Installation (Oracle Sparc Systems)

    To Verify Proper Installation (Oracle SPARC Systems) To Verify Proper Installation (Oracle SPARC Systems) Use the show-devs command at the ok prompt to list the installed devices. The Converged Network Adapter can be identified in the output by looking for the SUNW,qlc@n and SUNW,qlc@n,1 node names, where n is usually a single-digit number from 0 to 9.
  • Page 29 To Verify Proper Installation (Oracle SPARC Systems) /pci@8,4000/ebus@1 /pci@8,4000/ebus@1/panel@14,280030 /pci@8,4000/ebus@1/scfc@14,200000 /pci@8,4000/ebus@1/serial@14,400000 /pci@8,4000/ebus@1/flashprom@10,0 /cmp@408,0/core@1 /cmp@408,0/core@0 /cmp@408,0/core@1/cpu@1 /cmp@408,0/core@1/cpu@0 /cmp@408,0/core@0/cpu@1 /cmp@408,0/core@0/cpu@0 /cmp@400,0/core@1 /cmp@400,0/core@0 /cmp@400,0/core@1/cpu@1 /cmp@400,0/core@1/cpu@0 /cmp@400,0/core@0/cpu@1 /cmp@400,0/core@0/cpu@0 /openprom/client-services /packages/hsfs-file-system /packages/ufs-file-system /packages/obp-tftp /packages/terminal-emulator /packages/disk-label /packages/deblocker /packages/SUNW,builtin-drivers /packages/SUNW,probe-error-handler To identify the port as a Sun Storage 10 GbE FCoE PCIe Converged Network Adapter port, use the cd command to change to the SUNW,qlc@n directories, and use the .properties command, as shown in the following example:...

  • Page 30: To Verify Attached Storage (Oracle Sparc Systems)

    To Verify Attached Storage (Oracle SPARC Systems) revision-level 3.12 port# 00000001 version QLE8142 Host Adapter FCode(SPARC): 3.15 2010-01-11 19:29 model QLE8142 node-wwn 20 00 00 c0 dd 0a b4 73 port-wwn 21 00 00 c0 dd 0a b4 73 00020300 00000000 00000000 00000000 00000000...

  • Page 31: To Verify Proper Installation (Oracle X86 Systems)

    To Verify Proper Installation (Oracle x86 Systems) In the following example, a storage “just a bunch of disks” (JBOD) has one target and two LUNs attached to one port of a dual-port Converged Network Adapter. {0} ok show-disks a) /pci@7c0/pci@0/pci@8/SUNW,qlc@0,3/fp@0,0/disk...
  • Page 32 To Verify Proper Installation (Oracle x86 Systems) BIOS for Adapter 0 is disabled BIOS for Adapter 1 is disabled ROM BIOS NOT INSTALLED   Immediately press Ctrl-Q The following QLogic Fast!UTIL menu is displayed. QLogic Corporation QLE8152 PCI3.0 Fibre Channel ROM BIOS version 2.14 Copyright (c) QLogic Corporation 1993-2009.
  • Page 33 To Verify Proper Installation (Oracle x86 Systems)                         Configuration Settings                         Scan Fibre Devices                         Fibre Disk Utility                         Loopback Data Test                         Select Host Adapter                         Exit Fast!UTIL Use the Arrow key to highlight Scan Fibre Devices and press Enter. The following example shows a storage JBOD with seven targets attached to one port of a dual- port Converged Network Adapter.

  • Page 34: Updating The Pxe

    Supported operating systems for the BIOS PXE installation include: Windows Server 2008 R2 including SP1 64-bit ■ SLES 11 SP2 64-bit ■ Sun Storage 10 GbE FCoE PCIe Converged Network Adapter From QLogic Installation Guide For Adapter Models SG-PCIEFCOE2-Q-SR, SG-XPCIEFCOE2-Q-SR, SG-PCIEFCOE2-Q-TA, SG-XPCIEFCOE2-Q-TA, 7105381, and 7105382 • March 2017...

  • Page 35: Package Files

    Updating the PXE RH 5.9 and 6.4 64-bit ■ Oracle's Sun JumpStart PXE server ■ When installing an operating system from the PXE Server, ensure that the Note - selected OS supports the Converged Network Adapter relative to the BIOS or the UEFI environment.
  • Page 36 OS installation. For example: Linux Boot Server: boot: (enter to continue) Sun Storage 10 GbE FCoE PCIe Converged Network Adapter From QLogic Installation Guide For Adapter Models SG-PCIEFCOE2-Q-SR, SG-XPCIEFCOE2-Q-SR, SG-PCIEFCOE2-Q-TA, SG-XPCIEFCOE2-Q-TA, 7105381, and 7105382 • March 2017...

  • Page 37: Updating The Fcode

      ... Updating the FCode Oracle recommends updating to the latest version of the FCode when using this Converged Network Adapter. FCode for the Converged Network Adapter supports Ethernet boot by means of the Ethernet function. This section provides the following information about the FCode update: “Hardware and Software Configuration for FCode”...

  • Page 38: Hardware And Software Configuration For Fcode

    FCode Update Utilities You can update the FCode using the SANsurfer FC HBA Manager or SANsurfer FC HBA CLI utilities. These utilities are located on the Oracle support area of the QLogic web site: http://driverdownloads.qlogic.com/QLogicDriverDownloads_UI/Oracle_Search.aspx Sun Storage 10 GbE FCoE PCIe Converged Network Adapter From QLogic Installation Guide For Adapter Models SG-PCIEFCOE2-Q-SR, SG-XPCIEFCOE2-Q-SR, SG-PCIEFCOE2-Q-TA, SG-XPCIEFCOE2-Q-TA, 7105381, and 7105382 •...

  • Page 39: Removing The Hardware

    Removing the Hardware Before flashing the FCode, install the latest QLogic/Oracle Solaris Converged Network Adapter driver. Then copy the multi-boot binary file Q8Qxxyyy.BIN on the Oracle SPARC system under the root(/) directory. For procedures on updating FCode using the SANsurfer utilities, refer to the QLogic SANsurfer FC HBA Manager help system and the SANsurfer FC HBA CLI User's Guide.
  • Page 40 Sun Storage 10 GbE FCoE PCIe Converged Network Adapter From QLogic Installation Guide For Adapter Models SG-PCIEFCOE2-Q-SR, SG-XPCIEFCOE2-Q-SR, SG-PCIEFCOE2-Q-TA, SG-XPCIEFCOE2-Q-TA, 7105381, and 7105382 • March 2017...

  • Page 41: Software Installation

    ■ Installing the Oracle Solaris Drivers The qlc and qlge drivers are included with the Oracle Solaris 10 01/13 and the Oracle Solaris 11.1 OSes (or later), and provide support for FCoE functionality with the Converged Network Adapter. You must load the latest qlc and qlge drivers by installing the appropriate platform...

  • Page 42: Diagnostic Support For The Oracle Solaris Os

    # patchadd patch-number Repeat steps 1 through 3 for the other patch. Diagnostic Support for the Oracle Solaris OS Diagnostic support for the HBA is included in the Oracle VTS software. The Oracle VTS software is available for download at: http://support.oracle.com/...

  • Page 43: Installing Software For The Oracle Linux, Red Hat, Or Suse Linux Os

    OS version of the driver (for example 11.0 for SLES 11). Oracle Linux, RHEL 5.4 and later, SLES 10 SP3 and later, and SLES 11 SP1 and later Note - have Converged Network Adapter driver support in the distro;...

  • Page 44: Installing The Red Hat Or Suse Linux Drivers

    (the file name is in the format ql2xxx-src-vu.vv.ww.xx.yy.zz.tar.gz, where yy and zz represent the OS version of the driver (for example 11.0 for SLES 11). Oracle Linux, RHEL 5.4 and later, SLES 10 SP3 and later, and SLES 11 SP1 and later Note - have Converged Network Adapter driver support in the distro;...
  • Page 45 To Build the FCoE Driver You do not need to install any drivers for the Oracle Linux OS. Note - To Build the FCoE Driver The driver installation makes extensive use of the build.sh script, which is located in driver source (extras/build.sh).
  • Page 46 ” on page Install the driver module (*.ko) files to the appropriate kernel module directory. Sun Storage 10 GbE FCoE PCIe Converged Network Adapter From QLogic Installation Guide For Adapter Models SG-PCIEFCOE2-Q-SR, SG-XPCIEFCOE2-Q-SR, SG-PCIEFCOE2-Q-TA, SG-XPCIEFCOE2-Q-TA, 7105381, and 7105382 • March 2017...
  • Page 47 To Create the Driver # ./extras/build.sh install For SUSE Linux users, edit the /etc/sysconfig/kernel file and modify the INITRD_MODULES directive as shown in the following example. INITRD_MODULES="..qla2xxx" Change to the /boot directory. Back up the current RAMDISK image. # cp -f initrd-2.6.kernel-version.img initrd-2.6.kernel-version.img.bak Build the RAMDISK image with the mkinitrd command.
  • Page 48 Edit the INITRD_MODULES= line to append qlge; for example: INITRD_MODULES=piix thermal fan reiserfs qlge Issue the mkinitrd command; for example: Sun Storage 10 GbE FCoE PCIe Converged Network Adapter From QLogic Installation Guide For Adapter Models SG-PCIEFCOE2-Q-SR, SG-XPCIEFCOE2-Q-SR, SG-PCIEFCOE2-Q-TA, SG-XPCIEFCOE2-Q-TA, 7105381, and 7105382 • March 2017...
  • Page 49 To Remove the Driver mkinitrd -i initrd-2.6.16.60-0.21-smp-qlge -k vmlinuz-2.6.16.60-0.21-smp -M boot/ System.map-2.6.16.60-0.21-smp Type the entire preceding command on a single line. Note - Modify the menu.lst file to include the new RAMDISK as an option to boot from. Reboot the system. Modify the variables in the sysconfig as follows: Open the following file to edit: /etc/sysconfig/kernel...

  • Page 50: Diagnostic Support For The Red Hat Or Suse Os

    Read/Write Buffer test ■ To Install Diagnostic Support for the Red Hat or SUSE Linux Go to the Oracle support area of the QLogic web site at: http://driverdownloads.qlogic.com/QLogicDriverDownloads_UI/Oracle_Search.aspx Locate the table containing your Converged Network Adapter model. Sun Storage 10 GbE FCoE PCIe Converged Network Adapter From QLogic Installation Guide For Adapter Models SG-PCIEFCOE2-Q-SR, SG-XPCIEFCOE2-Q-SR, SG-PCIEFCOE2-Q-TA, SG-XPCIEFCOE2-Q-TA, 7105381, and 7105382 •...

  • Page 51: Installing Software For The Vmware Technology

    Installing Software for the VMware Technology At the bottom of the table, in the Software for: row, click Linux. Locate the QLogic CLI and GUI utilities for your Linux OS version. Click the utility name to download the utility to a local file system. For additional information, click the Read Me link for the utility.
  • Page 52 To Download the FCoE Driver To Download the FCoE Driver Go to the Oracle support area of the QLogic web site at: http://driverdownloads.qlogic.com/QLogicDriverDownloads_UI/Oracle_Search.aspx Locate the table containing your Converged Network Adapter model. At the bottom of the table, in the Software for: row, click Windows.

  • Page 53: Installing The Windows Drivers

    To Download the Networking Driver and Then Create a Driver Disk Miniport Driver Version Works With Windows Server 2008 SP2 (x64) Windows Server 2008 SP2 Server Core (x64) Windows Server 2008 R2 (x64) Windows Server 2008 R2 Server Core (x64) Go to the following web site: http://driverdownloads.qlogic.com/QLogicDriverDownloads_UI/Oracle_Search.aspx Click the Converged Network Adapters icon.
  • Page 54 If you are installing the driver from removable media, follow these steps: ■ Insert the media. Sun Storage 10 GbE FCoE PCIe Converged Network Adapter From QLogic Installation Guide For Adapter Models SG-PCIEFCOE2-Q-SR, SG-XPCIEFCOE2-Q-SR, SG-PCIEFCOE2-Q-TA, SG-XPCIEFCOE2-Q-TA, 7105381, and 7105382 • March 2017...
  • Page 55 To Update the Driver on Windows Click Locate and install driver software (recommended). If the Hardware Update Wizard prompts you to search online, click Don't search online. Click Next. The Update wizard locates the driver and automatically completes the installation. If you are not installing the driver from removable media, follow these steps: ■...
  • Page 56 This section contains procedures for the following: “To Update the Networking Driver on Windows ” on page 58 ■ Sun Storage 10 GbE FCoE PCIe Converged Network Adapter From QLogic Installation Guide For Adapter Models SG-PCIEFCOE2-Q-SR, SG-XPCIEFCOE2-Q-SR, SG-PCIEFCOE2-Q-TA, SG-XPCIEFCOE2-Q-TA, 7105381, and 7105382 • March 2017...
  • Page 57 To Install the Networking Driver on Windows “Updating the Existing NDIS Miniport Driver” on page 58 ■ “To Remove the Driver” on page 49 ■ ■ The Converged Network Adapter is a multifunction device. When installed in a Note - PNP system, the OS detects two functions for each adapter: Ethernet Controller and Fibre Channel Controller.
  • Page 58 If you are not installing the driver from removable media, follow these steps: ■ Sun Storage 10 GbE FCoE PCIe Converged Network Adapter From QLogic Installation Guide For Adapter Models SG-PCIEFCOE2-Q-SR, SG-XPCIEFCOE2-Q-SR, SG-PCIEFCOE2-Q-TA, SG-XPCIEFCOE2-Q-TA, 7105381, and 7105382 • March 2017...
  • Page 59 To Remove the Driver Click Browse my computer for driver software. Click I don't have the disk. Show me other options. Click Browse my computer for driver software (advanced). Browse to the location of the driver, and then click Next. A warning message might be displayed regarding the Digital Signature for Windows Logo Certification.

  • Page 60: Diagnostic Support For The Windows Os

    Installing the CLI for Updating the BIOS and FCode Oracle recommends updating to the latest version of the FCode when using this Converged Network Adapter. If you need to update the fibre channel BIOS and FCode, you can do so by using the QLogic SANsurfer command line interface (CLI).
  • Page 61 To Install Diagnostic Support for the Windows OS If you have not done so already, you can download the SANsurfer FC HBA CLI and SANsurfer Converged Network Adapter Networking CLI tools from the Oracle support area of the QLogic web site at: http://driverdownloads.qlogic.com/QLogicDriverDownloads_UI/Oracle_Search.aspx...
  • Page 62 Sun Storage 10 GbE FCoE PCIe Converged Network Adapter From QLogic Installation Guide For Adapter Models SG-PCIEFCOE2-Q-SR, SG-XPCIEFCOE2-Q-SR, SG-PCIEFCOE2-Q-TA, SG-XPCIEFCOE2-Q-TA, 7105381, and 7105382 • March 2017...

  • Page 63: Known Issues

    Link Aggregation Control Protocol (LACP) Cannot Be Used In Certain Conditions Bug 18707752 Conditions: System Platform: All supported systems using the Oracle Solaris driver ■ Operating Protocol Mode of Universal HBA: FC, CNA ■ Environment: Universal HBA connected directly to supported storage ■...

  • Page 64: Vpd R/W Failed Error Messages Are Displayed

    Operating System: Any operating system (OS) based on Red Hat Linux 5.9 or greater, ■ including, but not limited to, Oracle Enterprise Linux 5.9 OS with Unbreakable Enterprise Kernel (UEK) 3, RHEL 6.6 OS, or OVM 3.3.1 Operating Protocol Mode: CNA and HBA ■...

  • Page 65: Fcio_Reset_Link Error Message Occurs After Issuing The Luxadm -E Forcelip Command

    Bug 15632822 Issue: You might encounter this error message after issuing the luxadm -e forcelip command from a system with the following configuration: Oracle Solaris 10 10/09 OS running ■ Adapter installed and connected to a Brocade 8000 FCoE switch ■...

  • Page 66: System Panic After Installing The Adapter In An X86 System

    System Panic After Installing the Adapter in an x86 System Bug 15635205 Issue: If you install the adapter in an x86 system that is running the Oracle Solaris 10 10/09 OS, the system might panic when you perform any of the following actions: 1. Reboot the system.

  • Page 67: The Qlge Driver Keeps Sending Notice: Messages To The Console

    Bug 15622146 Issue: When configuring an Oracle Solaris 10 system with the adapter, the host-side adapter might not log into the Brocade 8000 switch unless VLAN 1002 is configured on the switch; specifically on the port to which the adapter is connected.

  • Page 68: Windows Server 2008 R2 Stop Error

    For details, see “Installing Software for the Windows OS” on page Sun Storage 10 GbE FCoE PCIe Converged Network Adapter From QLogic Installation Guide For Adapter Models SG-PCIEFCOE2-Q-SR, SG-XPCIEFCOE2-Q-SR, SG-PCIEFCOE2-Q-TA, SG-XPCIEFCOE2-Q-TA, 7105381, and 7105382 • March 2017...

This manual is also suitable for:

Sgxpciefcoe2-q-srSg-pciefcoe2-qtaSg-xpciefcoe2-q-ta71053817105382

Table of Contents