9�5�5 Set Colour Change Of The Display - IFM PN72 Series Operating Instructions Manual

9.5.5 Set colour change of the display
► Select [coLr] and set the function:
- [rEd] = display colour red (independent of the measured value)�
- [GrEn] = display colour green (independent of the measured
- [r1ou] = display colour red when OUT1 switches�
- [G1ou] = display colour green when OUT1 switches�
- [r2ou] = display colour red when OUT2 switches�
- [G2ou] = display colour green when OUT2 switches�
- [r-12] = display colour red when the measured value is between
- [G-12] = display colour green when the measured value is
- [r-cF] = display colour red when the measured value is between
- [G-cF] = display colour green when the measured value is
* The parameters [cFL] and [cFH] can only be selected in the menu tree if
)
[r-cF] or [G-cF] has been activated�
► Select [cFL] and set the lower limit
(only possible if [r-cF] or [G-cF] has been activated)�
> The setting range corresponds to the measuring range and its maximum
limit is [cFH]�
► Select [cFH] and set the upper limit
(only possible if [r-cF] or [G-cF] has been activated)�
> The setting range corresponds to the measuring range and its minimum
limit is [cFL]�
value)�
the limits of OUT1 and OUT2�
between the limit values of OUT12 and OUT2�
the freely definable limits [cFL]*) and [cFH]*)�
between the freely definable limits [cFL]*) and [cFH]*)�
UK
23