9�5 User Settings (Optional); 9�5�1 Set Delay Time For The Switching Outputs - IFM PN72 Series Operating Instructions Manual

9.5 User settings (optional)
9.5.1 Set delay time for the switching outputs
[dS1] / [dS2] = switching delay for OUT1 / OUT2�
[dr1] / [dr2] = reset delay for OUT1 / OUT2�
► Select [dS1], [dS2], [dr1] or [dr2] and set a value between 0 and 50 s (at
0 the delay time is not active)�
Output function:
[Hno] / [Hnc]
Output function:
[Fno] / [Fnc]
P = system pressure; SP = set point; rP = reset point; HY = hysteresis;
FE = window; FH = upper value; FL = lower value�
If operating mode 1 is used, the delay time will not behave as described here� Refer
to the operating instructions of the old device for details:
For this unit, the assignment of the parameters [dSx] and [drx] to the set and reset
points is strictly designed according to the VDMA guideline�
A
A:
dS
FH
FL
A B
A: B:
dS dr
B
B:
dr
C D
C:
dS
→ www�ifm�com
UK
D:
dr
21