Table of Contents
Advertisement
Leaner Setup
Note: For carts with the tarp option, make sure the bolts that are highlighted in figure 1 are 3/8"-16 x 1" Gr5 Z Pan Head Bolts.
Replace any other regular bolts in any location where the tarp may hit with a 3/8"-16 x 1" Gr5 Z Pan Head Bolt.
Figure 1
Install the Corners
•
Using 3/8"-16 x 1" Gr5 Z SF Hex Bolts and 3/8"-16 Gr5 Z SF Hex Nuts install the front and the rear corners as shown in Figures 2 & 3.
Note: The smaller corner is installed on the front of the cart and the large corner is installed on the rear of the cart.
Figure 2
Figure 3
16
Advertisement
Table of Contents
